Warren Reed - Designer Badger Watercolour Kitchen Splashback - 600mm x 650mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners looking to add a durable and artistic touch to their kitchen. The Warren Reed - Designer Badger Watercolour Kitchen Splashback offers a striking focal point with its high-resolution print on premium 6mm toughened glass, providing both style and easy maintenance. A key consideration is the specific adhesive required for installation.
All features
| Model Part Number | W600mm X H650mm |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
You must use a Clear Natural Curing Adhesive specifically designed for glass splashbacks. Always follow the adhesive manufacturer's instructions for application and curing.
Can this splashback be installed behind a gas hob?
Yes, it can withstand temperatures up to 400°C. However, ensure there is sufficient clearance between the hob and the splashback as recommended by your hob manufacturer's guidelines.
How do I clean the watercolour print?
The print is protected by the glass. Clean the surface with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid abrasive materials that could scratch the glass.
What are the available sizes for this splashback?
This specific model is W600mm x H650mm. Other available sizes include W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W700mm x H650mm, and W900mm x H650mm.
What is the warranty period for this product?
The product comes with a 1-year guarantee.
Is the glass easy to scratch?
No, the splashback is made from premium 6mm toughened glass and is scratch-resistant to withstand everyday kitchen use.
Do I need to drill holes to install it?
The design allows for installation without drilling, using adhesive. Ensure you follow the adhesive application guidelines precisely for secure fitting.
Troubleshooting
Splashback does not adhere securely.
Ensure the wall surface is clean, dry, and perfectly flat. Verify that the correct type and amount of Clear Natural Curing Adhesive were used, and that it was allowed to cure completely according to the adhesive manufacturer's instructions.
Smudges or streaks after cleaning.
Use a dedicated glass cleaner and a microfiber cloth. Wipe in a consistent direction (e.g., horizontal or vertical) and buff dry immediately to prevent streaks.
Visible damage (chip or crack) on the edge.
Inspect the damage closely. Minor chips might be cosmetic, but cracks can compromise structural integrity. Contact customer support for advice on repair or replacement if the damage is significant.
Print appears faded or discolored.
Ensure only recommended cleaning agents are used. Harsh chemicals can degrade the print. If the issue persists and the product is within its warranty period, contact customer support.
Pros and Cons
Pros
- Enhances kitchen aesthetics with a unique artistic design.
- Durable and long-lasting due to toughened glass construction.
- Easy to clean and maintain, promoting hygiene.
- Provides protection against splashes and heat.
- Simple installation process compared to traditional backsplashes.
Cons
- Requires specific Clear Natural Curing Adhesive for installation.
- Not suitable for all kitchen layouts without professional assessment.
- May be heavier than alternative materials, requiring secure mounting.
- The artistic design may not suit all interior styles.
- Limited to splashback application; not a full wall covering.
Setup, Compatibility & Care
Setup: Installation requires a clean, dry, and flat wall surface. Use Clear Natural Curing Adhesive specifically recommended for glass splashbacks. Apply the adhesive evenly to the wall or the back of the splashback as per adhesive instructions. Carefully position the splashback and press firmly to ensure good contact. Allow the adhesive to cure fully before exposing the splashback to heat or moisture. Ensure adequate ventilation during installation.
Compatibility: This splashback is designed for most standard kitchen wall installations. It is compatible with electric, gas, and induction hobs, provided there is adequate clearance as per hob manufacturer guidelines. Ensure wall integrity can support the weight of the glass.
Care: Clean the surface regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid using harsh chemicals, abrasive pads, or scouring agents, as these can damage the glass or the printed design. For stubborn marks, a gentle glass cleaner can be used. Ensure all cleaning products are rinsed off thoroughly.