Pentel Paint Marker - Medium Bullet Tip - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Pentel Paint Marker with a medium bullet tip is designed for artists, crafters, and DIY enthusiasts seeking a reliable, permanent marking solution. Its key benefit is the opaque, pigment-based ink that adheres to a wide variety of surfaces, offering vibrant and durable results. A potential caveat is the need for proper shaking and tip priming before use to ensure consistent ink flow.
All features
| Model Part Number | MMP10 |
|---|---|
| Brand | Pentel |
Extended Product Information
FAQs
How do I activate the paint flow for the first time?
Shake the marker well with the cap on. Then, press the tip down onto a suitable surface until the paint begins to flow. You may need to hold it down for a few seconds.
Can I use this marker on fabric?
While the ink is permanent, it is best suited for non-porous or semi-porous surfaces like plastic, metal, and glass. Results on fabric may vary and are not guaranteed to be permanent or wash-proof.
Is the ink waterproof once dry?
Yes, the paint ink is permanent and generally waterproof once fully dried, making it suitable for applications that may be exposed to moisture.
How long does the ink last?
The ink is designed to be permanent and fade-resistant. Longevity depends on the surface it's applied to and exposure to extreme conditions (e.g., UV light, abrasion).
Can I layer the paint from this marker?
Yes, you can layer the paint. Ensure the first layer is sufficiently dry before applying subsequent layers for best results and to avoid smudging.
What surfaces should I avoid using this marker on?
Avoid very waxy, oily, or excessively porous surfaces where the paint may not adhere properly or could feather excessively. Always test on a small, inconspicuous area first.
Does the marker have a shelf life?
When stored correctly with the cap tightly sealed and stored horizontally, the marker can last for a considerable time. Pigment may settle over long periods, requiring thorough shaking.
Troubleshooting
Marker won't write or ink flow is weak.
Ensure the marker was shaken thoroughly. Press the tip firmly onto a surface to activate ink flow. If the tip is dry, gently moisten the tip with water and re-cap, then shake again.
Ink appears streaky or uneven.
Shake the marker again during use, as pigment can settle. Ensure the surface is clean and free from dust or grease. Apply with consistent pressure.
Tip feels dry or clogged.
If the marker has been stored uncapped, the tip may dry out. Re-shake the marker, then press the tip repeatedly onto a suitable surface until ink flows. Avoid using solvents for cleaning.
Ink bleeds or feathers on the surface.
This can occur on highly absorbent surfaces. Test on a similar material first. Ensure the surface is prepared correctly; some porous materials may require a primer or sealant.
Pros and Cons
Pros
- Permanent and opaque ink ensures lasting, visible marks.
- Suitable for a broad spectrum of surfaces, enhancing versatility.
- Durable aluminum barrel construction for increased longevity.
- Low-odor and xylene-free formula for safer use.
- Medium bullet tip offers a good balance between detail and coverage.
Cons
- Requires shaking and tip activation before initial use.
- May require multiple passes on very porous surfaces for full opacity.
- Not suitable for all very smooth, non-porous surfaces without preparation.
- Ink permanence may be affected by harsh abrasive cleaning.
- Drying time can vary depending on the surface and thickness of application.
Setup, Compatibility & Care
Setup: Before the first use, ensure the marker is shaken vigorously with the cap securely on. Once shaken, press the tip down onto a scrap surface or paper until the paint flows evenly and the tip is saturated. Test the flow on scrap material before applying to your final project.
Compatibility: This marker is suitable for use on thick card, metal, glass, plastic, rubber, and other non-porous or semi-porous surfaces. It may not adhere effectively to waxy or heavily oiled surfaces without proper cleaning and preparation.
Care: After use, immediately replace the cap tightly to prevent the tip from drying out. Store the marker horizontally to ensure even ink distribution. To clean the tip if it becomes clogged, gently wipe with a slightly damp cloth; avoid soaking or using solvents, as this may damage the tip and ink flow.