Best current price£22.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£22.00Visit shop B&Q - Extreme Protection Medium Oak Gloss Multi-Surface Wood Varnish750Ml
Visit shop1 offer from £22.00
View price history by clicking the chart icon.
This V33 Extreme Protection Medium Oak Gloss Wood Varnish is designed for homeowners and DIY enthusiasts looking to enhance and protect furniture and woodwork. Its primary benefit is superior scratch and stain resistance thanks to embedded ceramic particles, ensuring a durable and long-lasting finish. A potential caveat is its specific medium oak gloss finish, which may not suit all aesthetic preferences.
| Colour | Brown |
|---|---|
| Brand | V33 |
This varnish is ideal for interior furniture and woodwork. It can be applied to bare wood or previously finished wood surfaces after proper preparation.
It is generally recommended to apply at least two coats for optimal protection. Always refer to the product's specific instructions for detailed guidance.
No, this varnish is not formulated for floor application. It is designed for furniture and vertical woodwork.
Clean gently with a soft, damp cloth. Avoid abrasive cleaners or solvents.
The fine ceramic particles enhance the hardness of the varnish, providing superior resistance to scratches and stains.
The varnish provides a medium oak gloss finish. It will add a gloss sheen and a medium oak tone, enhancing and protecting the natural wood appearance rather than completely obscuring it.
No, this product is intended for interior use only.
Ensure application in a well-ventilated area with appropriate temperature and humidity. Check that coats were not applied too thickly. Verify that the product has not expired.
Lighten the pressure when applying. Ensure you are using a high-quality brush or roller suitable for varnishes. Apply in thin, even coats and maintain a wet edge.
Ensure sufficient coats have been applied and allowed to cure fully. Surface preparation may need to be re-evaluated, ensuring the wood was clean and suitably prepped before application.
Setup: Ensure the surface to be varnished is clean, dry, and free from dust, grease, and old finishes. Lightly sand smooth surfaces to improve adhesion. Apply the varnish in thin, even coats using a good quality brush or roller, allowing adequate drying time between coats as per the product instructions. It is recommended to apply at least two coats.
Compatibility: This varnish is designed for interior woodwork and furniture. It is generally compatible with most bare or previously finished wood surfaces, provided they are properly prepared. It is not recommended for floors or exterior use.
Care: Clean surfaces gently with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the protective finish. For stubborn marks, use a mild soap solution and wipe dry immediately.
