Amber / Orange LED Side Marker Light / Lamp Trailer Caravan Van 12V or 24V - AB Tools - TR118
This listing is for an amber / orange LED side marker light suitable for trailers, caravans, vans ...This listing is for an amber / orange LED side marker light suitable for trailers, caravans, vans etc... This listing is for one lamp, they are available in pairs in our shop.
High quality light, fitted by many top manufacturers, perfect for marking the side of a trailer or other vehicle.
Suitable for use with 12V or 24V. Perfect for trailers that may be used on 24V and 12V vehicles.
Also serves as an amber / orange retro reflector when not lit.
The LED's draw very little current compared to a bulb and last much longer.
Sizes are as pictured. 120mm total width and 63mm tall. Approx. 21mm thick.
Supplied complete with 2m of twin core cable.
Easy to fit, simple two wire connection. (NOTE. Unlike bulbs, LED lights will only work if the wires are connected the right way round. The red wire is positive and the black one is negative. If you connect them t.
This guide is for owners of trailers, caravans, and vans needing reliable side marker lighting. The AB Tools TR118 provides a high-quality, durable amber/orange LED light that also functions as a retro-reflector. A minor caveat is that LED polarity must be observed for proper function. Key features include suitability for 12V and 24V systems, long-lasting LED technology, and a compact design.
All features
Model Part Number
TR118
Brand
AB Tools
Extended Product Information
FAQs
Is this listing for a single lamp or a pair?
This listing is for a single amber / orange LED side marker light. Pairs are available in separate listings.
Can I use this light on both 12V and 24V systems?
Yes, this LED side marker light is designed to work with both 12V and 24V DC electrical systems.
What are the dimensions of the lamp?
The lamp is approximately 120mm wide, 63mm tall, and about 21mm thick.
Does the lamp require a specific polarity connection?
Yes, LED lights require correct polarity. The red wire must be connected to the positive (+) and the black wire to the negative (-) terminal.
Does this lamp function as a reflector?
Yes, when not illuminated, the lamp serves as an amber/orange retro-reflector.
How long is the included cable?
The lamp is supplied complete with 2 meters of twin-core cable.
What is the expected lifespan of the LEDs?
LEDs have a significantly longer lifespan compared to traditional incandescent bulbs.
Troubleshooting
Light does not turn on
Check that the red wire is connected to the positive (+) terminal and the black wire to the negative (-) terminal of your vehicle's electrical system. Ensure the vehicle's power supply is active.
Intermittent flickering or dim light
Inspect the wire connections for looseness or corrosion. Ensure a stable power supply from the vehicle.
Light fails after a short period
Verify that the voltage of your vehicle's system (12V or 24V) is compatible with the lamp. Check for any physical damage to the lamp or wiring.
Pros and Cons
Pros
Longer lifespan compared to traditional bulbs
Lower power consumption
Dual voltage support (12V/24V)
Acts as a retro-reflector when off
Durable and reliable build quality
Easy two-wire installation
Cons
LEDs require correct polarity for operation
Listing is for a single lamp (pairs sold separately)
Specific dimensions may not fit all applications without modification
Setup, Compatibility & Care Instructions
Setup:
Mounting: Determine the optimal location on the side of your trailer, caravan, or van. Ensure the surface is clean and dry.
Wiring: Connect the two wires from the lamp. The red wire is positive (+) and the black wire is negative (-). Incorrect polarity will prevent the LED from lighting up.
Securing: Secure the lamp in place using appropriate mounting hardware (not included).
Compatibility:
Voltage: Compatible with both 12V and 24V DC electrical systems.
Vehicle Types: Suitable for trailers, caravans, vans, and other vehicles requiring side marker lights.
Care:
Cleaning: Clean the lens surface periodically with a soft, damp cloth. Avoid abrasive cleaners that could scratch the lens.
Inspection: Regularly inspect the wiring connections and the lamp housing for any signs of damage or corrosion.