Plumbright Endfeed One End Branch Reduced Tee - 35 x 35 x 28mm

This fitting is used to create a connection point for a smaller pipe (28mm) to branch off from a larger pipe (35mm) within a plumbing system, ensuring a strong and leak-free connection.

The fitting is manufactured from Grade A copper, known for its durability, corrosion resistance, and hygienic properties.

Yes, it holds the British standard Kitemark licence and is manufactured to the EN 1254-1 standard, and is WRAS approved.

It is suitable for various plumbing systems including hot and cold water and central heating, provided the pipe sizes (35mm and 28mm copper) and system conditions are compatible.

Yes, copper has natural antimicrobial properties that can contribute to water hygiene.

This is an endfeed fitting, typically connected by soldering the copper pipe into the fitting's socket after applying flux.

Yes, copper is a fully recyclable material.

Ensure the joint was properly heated and soldered, with sufficient solder penetration. Re-solder the joint if necessary, ensuring surfaces are clean and fluxed correctly.

Check for any obstructions or deformation in the pipe end or fitting socket. Ensure the pipe is cut square and deburred.

The joint may not have reached adequate temperature, or flux may be insufficient/absent. Reheat the joint and apply more solder.