Silca Ultimate Tubeless Tyre Sealant V2 - 500ml

The sealant remains liquid and effective for up to six months. However, it's recommended to check and top up the sealant every 3-6 months depending on usage.

Yes, the formula is CO2 safe and will not coagulate during inflation.

It can seal holes up to 6mm in size.

Refer to the guidelines on the sealant bottle for the recommended amount based on your tyre size.

Remove the valve core, inject the sealant, and then re-inflate the tyre.

Yes, it is compatible with most tubeless tyre systems.

Use a damp cloth and mild soap. The carbon fiber strands can be a bit tricky, so be thorough.

Store it in a cool, dry place, away from direct sunlight and extreme temperatures.

Check sealant level; add more if low. Ensure tyre pressure is correct. Inspect the tyre for larger punctures that may exceed the sealant's capacity.

Check valve stem for leaks; tighten or replace the valve core. Ensure the tyre is properly seated on the rim. Inspect the tyre for cuts or damage.

Check storage conditions. Ensure the sealant is not exposed to extreme temperatures or direct sunlight. If the sealant is older than 6 months, consider replacing it.

Ensure the valve core is removed. Use a sealant injector with a narrow tip. Agitate the sealant bottle before injecting.