Rit DyeMore Liquid Dye - Midnight Navy

No, Rit DyeMore is specifically formulated for synthetic fibers like polyester, acrylic, and nylon. For cotton and other natural fibers, use Rit All-Purpose Dye.

Continuous stirring of the fabric in the dye bath for the full 30 minutes (or longer for darker shades) and maintaining a consistent water temperature between 140°F and 160°F (60°C - 71°C) are crucial for even color.

A general guideline is to use one bottle of Rit DyeMore for each pound of dry fabric. Adjust the amount based on the desired color depth and fabric type.

Yes, Rit DyeMore colors can be mixed to create custom shades. Experiment with small batches to achieve your desired color before dyeing your main project.

Clean the dye pot immediately after use with a detergent solution and hot water. Ensure it is thoroughly rinsed and dried before storing. Never use a dye pot for food preparation.

When used correctly with the recommended methods, Rit DyeMore creates a permanent color. However, it's always advisable to wash dyed items separately for the first few washes.

The ideal water temperature for Rit DyeMore is between 140°F and 160°F (60°C - 71°C). Do not boil the water, as this can damage certain synthetic fibers.

Ensure the water temperature was consistently between 140°F and 160°F (60°C - 71°C) and that you stirred continuously for at least 30 minutes. Verify that the fabric composition is suitable for Rit DyeMore. For a darker shade, increase the dye concentration or dye time.

Check the fabric's fiber content. Rit DyeMore is designed for synthetics; if the fabric is 100% natural fiber (like cotton or linen), it will not dye effectively. Ensure the fabric was clean and free of any finishes before dyeing.

Rinse the fabric thoroughly in cold water immediately after dyeing until the water runs clear. Wash the item separately in cold water for the first few washes with a mild detergent. Ensure you have used the correct amount of dye for the weight of the fabric.

Clean spills immediately with a detergent solution and hot water. Protect surrounding work surfaces with plastic sheeting or old newspapers.