Pentel Paint Marker - Mmp20 - Gold
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Pentel Paint Marker (MMP20) in Gold is designed for artists, crafters, and DIY enthusiasts needing a permanent, opaque marking solution. Its key benefit is delivering vivid, paint-like lines on a variety of surfaces, making it ideal for detailed work and durable applications. A potential consideration is that the valve-controlled tip requires proper activation and maintenance to ensure consistent ink flow.
All features
| Model Part Number | Mmp20 |
|---|---|
| Brand | Pentel |
Extended Product Information
FAQs
How do I get the ink to flow initially?
Shake the marker vigorously. Then, press the tip down firmly on a piece of scrap paper or cardstock several times. You should see ink begin to saturate the tip. Continue pressing until a consistent flow is achieved.
Can I use this marker on fabric?
While the ink is permanent and opaque, it is best suited for non-porous or semi-porous surfaces like metal, glass, and plastic. Performance on fabric may vary and is not guaranteed.
Is the ink permanent once dry?
Yes, the ink is permanent and designed to be fade-resistant and water-resistant once fully dry.
What is the line width of the bullet tip?
The medium bullet tip writes a line approximately 2.5mm to 2.9mm wide.
Can I get this marker in other colors?
The Pentel MMP20 series is available in a wide range of colors. This specific guide and product code (MMP20) refers to the Gold variant. Please check other listings for different color options.
How should I store the marker?
Store the marker horizontally or tip-down to ensure the ink stays saturated in the tip. Always ensure the cap is securely fastened after use.
Is this marker suitable for outdoor use?
The permanent and opaque ink offers good durability. However, for prolonged outdoor exposure, the longevity may depend on the specific surface and environmental conditions.
Troubleshooting
Marker does not write or ink flow is weak.
Shake the marker well. Press the tip down on a scrap surface multiple times to activate the valve and prime the tip. Ensure the cap was securely on and the marker has not dried out.
Ink is too thin or streaky.
Shake the marker vigorously. Ensure the tip is fully saturated with ink. On very porous surfaces, a second coat may be required for full opacity.
Tip is clogged.
Gently clean the tip with a damp cloth. Re-prime the marker by pressing the tip down on a scrap surface until ink flows smoothly. Store marker with cap on tightly.
Ink smudges after application.
Allow adequate drying time for the ink to set. Ensure the surface was clean and free of grease or dust before application. For some surfaces, a sealant may be required for maximum smudge resistance.
Pros and Cons
Pros
- Permanent and opaque ink for long-lasting, vibrant results.
- Suitable for a wide range of common and challenging surfaces.
- Medium bullet tip provides good control for various applications.
- Valve-controlled system ensures reliable ink delivery.
- Formulated without harmful solvents like xylene and toluene.
Cons
- Requires priming the valve before first use.
- Tip can dry out if not capped properly after use.
- May require multiple passes on very porous surfaces for full opacity.
- Limited to a single color (Gold) in this specific variant.
Setup, Compatibility & Care
Setup: Before first use, shake the marker well. Press the tip down firmly on a piece of scrap paper or cardstock several times until the ink starts to flow and saturate the tip. This activates the valve system.
Compatibility: This marker is compatible with a wide array of surfaces including, but not limited to:
- Metal
- Glass
- Plastic
- Rubber
- Wood
- Thick Cardstock
- Ceramics
- Photos
Care: Always replace the cap securely after each use to prevent the tip from drying out. Store the marker horizontally or tip-down to maintain ink flow. If the tip becomes clogged or ink flow is reduced, gently clean the tip with a damp cloth and re-prime the valve as described in the setup section. Avoid extreme temperatures during storage.