Best current price£25.00from eBay
Shopping.co.uk recommended and popular offers
eBay£25.00Visit shop 2 x 3M Car Body Schutz Black Underseal 1 litre Textured Underbody Coating 08861
Visit shop3 offers from £25.00 - £27.35
View price history by clicking the chart icon.
The 3M Car Body Schutz Underseal is designed for automotive enthusiasts and professional technicians who need to reinforce vehicle undercarriages against environmental degradation. This rubberized, textured coating excels at creating a resilient barrier against stone chips, salt, and moisture, though it requires specific application equipment and a clean surface to ensure optimal adhesion and finish.
| Model Part Number | 08861 |
|---|---|
| Brand | 3M |
Yes, it can be applied over properly scuffed and cleaned automotive paint, but it adheres best to prepared metal or primer.
Yes, it requires a standard canister underbody coating spray gun that mounts directly to the 1-liter bottle.
While it may feel dry to the touch within a few hours, allow 24 hours for the product to fully cure and harden.
3M Car Body Schutz is generally intended as a final undercarriage coating, but you should check specific technical data if you intend to overpaint it.
Due to its thick, rubberized composition, it provides a noticeable reduction in road noise and vibrations.
The surface likely contained contaminants or moisture during application. Ensure the area is degreased and perfectly dry.
Check the viscosity of the product and ensure the air compressor is providing sufficient, consistent pressure. Clean the nozzle tip immediately.
To ensure success, the surface must be clean, dry, and free of oil or grease. Remove any existing loose rust with a wire brush or sandpaper before application. Use an appropriate spray gun specifically designed for 1-liter Schutz canisters, ensuring the air pressure is set according to the tool manufacturer’s specifications to achieve the desired texture. Apply in light, overlapping passes rather than one thick layer to avoid sagging. Once applied, the product requires adequate time to cure before exposing the vehicle to road debris. Clean the spray gun immediately after use with a suitable solvent to prevent clogging.
