Best current price£21.95from Merlin Cycles
Shopping.co.uk recommended and popular offers
Merlin Cycles£21.95Visit shop Galfer Green Pro Bike Disc Brake Pads - / Sram - Red / Force / Rival / Level Tlm & Ultimate
Visit shop1 offer from £21.95
View price history by clicking the chart icon.
The Galfer Pro Disc Brake Pads are engineered specifically for competitive riders participating in downhill, enduro, and e-MTB racing who require uncompromising stopping power and precise modulation. These high-performance pads offer elite-level heat resistance and a rapid initial bite, making them ideal for aggressive trail riding and high-speed descents. However, because they are a race-specific compound, they prioritize performance and fade resistance over long-term longevity, meaning riders should monitor wear more frequently than with standard organic or semi-metallic pads.
| Series | Pro |
|---|---|
| Model Part Number | GA-FD469G1554T |
| Brand | Galfer |
Galfer Pro pads are manufactured for specific caliper shapes. Always check the specific part number (GA-FD469G1554T) against your caliper model to ensure fitment.
While they will work, they are optimized for racing. You may find they wear out faster than standard compounds, which are more cost-effective for daily riding.
It is not strictly required, but cleaning the rotor with isopropyl alcohol or a dedicated brake cleaner is highly recommended to remove old pad deposits.
Replace the pads when the friction material thickness is less than 0.5mm or if you notice a significant drop in braking power.
The Galfer Pro compound is designed for low-noise performance, though some minor sound during heavy braking in wet conditions is normal for high-performance metallic compounds.
Check your brake system for air bubbles and bleed the lines; confirm the pads are correctly seated and the retention clip is secure.
Verify that your rotors are clean and free of oil or debris; ensure the pads have been properly bedded in after installation.
Check if the brake pads are glazed over or contaminated with lubricants; if contaminated, replace the pads and clean the rotor with specialized degreaser.
To ensure peak performance, it is vital to pair these pads with clean, undamaged rotors. Before installation, clean the rotors thoroughly with a dedicated brake cleaner to remove any oils or contaminants from previous pads. During installation, ensure the piston movement in your caliper is even. Although these pads have minimal bedding-in requirements, it is recommended to perform several firm stops from moderate speed on a flat, safe surface to properly mate the pad surface to the rotor. For care, avoid using oil-based sprays near the bike, as even microscopic amounts of contamination can degrade the performance of the Pro compound. Inspect the pad material thickness regularly; if the friction material is worn down to less than 0.5mm, replace the pads immediately to prevent metal-on-metal contact with your rotors.
