Maston Wood Lacquer Spray - High Gloss

Best current price£9.39from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£9.39Visit shop Maston Spray Wood Lacquer 90 High Gloss 400ml
Visit shop
Best current price£9.39from eBay
Shopping.co.uk recommended and popular offers
eBay£9.39Visit shop Maston Spray Wood Lacquer 90 High Gloss 400ml
Visit shop3 offers from £9.39 - £26.99
View price history by clicking the chart icon.
This guide is for anyone looking to protect and enhance wooden surfaces using Maston Wood Lacquer Spray. The key benefit is long-lasting, weatherproof protection, ideal for both indoor and outdoor projects. Keep in mind that proper surface preparation, including sanding, is crucial for optimal results. This guide will walk you through the key features, best practices, and troubleshooting tips.
| Brand | Maston |
|---|
For optimal protection and appearance, apply two to three thin coats, allowing each coat to dry completely.
Yes, it is weatherproof and suitable for outdoor use.
Allow at least 1-2 hours between coats, depending on environmental conditions like temperature and humidity.
It is best used on new or sanded wooden surfaces. Remove any old paint before application.
Turn the can upside down and spray until only propellant comes out. This helps clear the nozzle.
Wash the affected area with soap and water. If irritation persists, consult a doctor.
Yes, sanding the surface is recommended to ensure the best adhesion and a smooth finish.
Store in a cool, dry place away from direct sunlight and heat sources. Ensure the can is tightly sealed.
Ensure you are spraying in even coats from the correct distance. Apply thinner coats and allow each coat to dry completely before applying the next.
Ensure adequate ventilation and avoid spraying in extremely humid or cold conditions. Make sure the surface is clean and dry before application.
Ensure the lacquer is stored correctly, and the surface is not exposed to excessive heat or direct sunlight.
Apply additional coats, ensuring each coat is fully dried. For a higher gloss, lightly sand the surface between coats.