Sealey Tap Set - 2 Piece - M6 x 1mm - Taper & Plug

The taper tap is used to start the thread, making it easier to guide the tap into the hole.

The plug tap is used to finish the thread, allowing it to go to the bottom of a blind hole or to a specific depth.

This tap set is suitable for use on a variety of metals and some plastics. Always check the material's suitability before tapping.

Use the correct drill size, apply even pressure, and use cutting oil to lubricate the tap. Avoid excessive force and ensure the tap is aligned correctly.

Use a brush or compressed air to remove metal shavings, and then apply a light coat of oil to prevent rust.

Try reversing the tap slightly to break the thread. If it's still stuck, use a tap extractor tool to remove the broken tap, or consult a professional.

This tap set is specifically for M6 x 1mm threads.

Replacement taps can be found at most tool suppliers. Ensure you purchase the correct M6 x 1mm taps.

Ensure the correct drill size is used and apply even pressure. Use cutting oil and avoid excessive force. If the tap is stuck, try reversing slightly to break the tap before trying to remove it.

Ensure the tap is aligned correctly with the hole. Apply even pressure and rotate the tap smoothly. Check the drill size and material suitability.