End Feed Straight Coupling - 22mm
Best current price£0.60from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£0.60Visit shop End Feed Straight Coupling 22mm
Visit shopTravis Perkins£0.60Visit shop One Offer
1 offer from £0.60
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone using the End Feed Straight Coupling - 22mm for plumbing applications, offering a reliable and durable solution for connecting copper pipes. This coupling provides a leak-free connection, suitable for central heating, hot and cold water supplies, and even low-pressure domestic gas installations. However, proper soldering technique is essential for a secure and lasting seal.
All features
| Model Part Number | 78019 |
|---|---|
| Brand | Travis Perkins |
Extended Product Information
FAQs
What size pipes does this coupling fit?
This coupling fits 22mm copper pipes.
Is this coupling suitable for gas?
Yes, it can be used in low-pressure domestic gas installations.
What materials is the coupling made of?
The coupling is made from Grade A copper.
Do I need any special tools to install this?
Yes, you will need a pipe cutter, flux, solder, and a heat source (e.g., a torch).
Is this coupling Kitemark approved?
Yes, the coupling is Kitemark approved.
What is the guarantee on this product?
This product comes with a 25-year guarantee.
How do I clean the coupling?
The coupling doesn't require cleaning. Ensure the pipe is clean before inserting it.
Troubleshooting
Joint leaks after installation.
Ensure the pipes were fully inserted into the coupling before soldering and that solder properly flowed around the entire joint. Re-solder the joint if necessary.
Difficulty soldering the joint.
Ensure the pipe and fitting are clean. Use sufficient flux. Apply heat evenly and use the correct type of solder.
Pros and Cons
Pros
- Durable and long-lasting due to Grade A copper construction.
- Corrosion-resistant for extended lifespan.
- Easy to install with end feed design.
- Suitable for a wide range of applications.
- Guaranteed for 25 years, offering peace of mind.
Cons
- Requires soldering skills for proper installation.
- Requires heat and solder wire, which can be an additional cost.
- May not be suitable for all types of plumbing systems.
Setup, Compatibility & Care
- Preparation: Ensure both copper pipes are clean and free from debris. Use a pipe cutter to make a clean, square cut on each pipe.
- Assembly: Insert the copper pipes into each end of the coupling. Ensure they are fully inserted.
- Soldering: Apply flux to the pipe and the coupling. Use heat from a torch and apply solder wire to the joint until it flows around the connection.
- Cooling: Allow the joint to cool completely before testing the system.
Compatibility: This coupling is compatible with 22mm copper pipes. It is WRAS approved and conforms to EN 1254-1 standards.
Care: No specific maintenance is required. However, periodically inspect the connections for leaks. If a leak is detected, re-solder the joint.