VEWERK 3pc Wire Brush Set - Brass, Nylon, Stainless Steel - 2180

The brass brush is softer and ideal for cleaning and polishing without significant scratching. The nylon brush is for general cleaning and scrubbing on surfaces where minimal marking is desired. The stainless steel brush is the most aggressive, designed for heavy-duty tasks like rust and paint removal.

Yes, the nylon brush is suitable for general cleaning on wood. The brass brush can be used on wood for light cleaning or distressing, but use with caution to avoid excessive scratching. The stainless steel brush is generally too aggressive for most wood applications unless heavy material removal is intended.

The handles are shaped ergonomically to provide a comfortable and secure grip, designed to reduce user fatigue during prolonged use.

The brass brush is approximately 175mm (7 inches), and the nylon and stainless steel brushes are approximately 213mm (8 1/2 inches) long.

Tap off loose debris, and if necessary, rinse with water. Allow them to air dry completely before storing. Avoid using harsh chemicals.

These brushes are designed for manual use. They are not intended for attachment to power tools.

The bristle length for all three brushes is approximately 15mm (1/2 inch), with a tolerance of +-2mm.

This can happen with heavy use. For minor bending, you might try soaking the bristles in hot water for a few minutes and then reshaping them. However, significantly splayed bristles may indicate wear and the brush should be considered for replacement.

Ensure you are using the correct brush type for the material and the level of grime. For tougher jobs, apply slightly more pressure or use a cleaning solution appropriate for the surface and brush material. Check if bristles are worn down.

While stainless steel is rust-resistant, it is not entirely rust-proof, especially in humid environments or if exposed to corrosive materials. Ensure the brush is cleaned and thoroughly dried after each use, and stored in a dry location.