Best current price£52.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£52.90Visit shop VEVOR 24 Inch/600mm Tile Cutter Double Rails & Brackets Manual Tile Cutter 3/5 in Cap with Precise Laser Manual Tile Cutter Tools for Precision Cutting
Visit shop1 offer from £52.90
View price history by clicking the chart icon.
The VEVOR 24-inch Manual Tile Cutter is designed for professionals and DIY enthusiasts seeking precise and repeatable cuts on ceramic and porcelain tiles. Its key benefit lies in the infrared laser guide for accuracy and double guide rails for smooth operation, enabling clean cuts up to 24 inches long. A potential caveat for some users might be its 17 lb weight, requiring stable placement for optimal use.
| Model Part Number | CZQGJ600MMSDSGL05V0 |
|---|---|
| Brand | VEVOR |
The maximum cutting thickness for this VEVOR tile cutter is 0.59 inches (15mm).
While primarily designed for ceramic and porcelain, it may cut softer types of marble. However, always test on a scrap piece first, as marble hardness varies significantly.
Use the adjustable slide scale on the base. Loosen the locking mechanism, set the desired angle from 0° to 60°, and then retighten the lock securely.
Yes, the infrared laser positioning system typically requires batteries. Please check the product manual or packaging for the specific battery type needed.
The minimum cutting width for this model is 1.38 inches (35mm).
It is recommended to lubricate the guide rails periodically, especially after cleaning or if you notice any stiffness in the cutting head's movement, to ensure optimal performance.
For mosaic tiles, it is best used for cutting larger individual pieces within the mosaic sheet rather than the entire sheet at once, depending on the sheet's size and complexity.
Ensure the cutting wheel is sharp and clean. Apply consistent, firm pressure when scoring. Check that the tile is properly seated and supported on the base.
Verify the cutting wheel is properly installed and making contact. Ensure the laser guide is powered on and the tile is positioned correctly. Check the tile material; very hard tiles may require multiple passes or specialized cutters.
Confirm that the support feet are fully extended and locked. Ensure the cutter is on a flat, solid surface. Check the weight of the tile being cut; do not exceed the maximum specified thickness.
Check and replace the batteries if necessary. Ensure the laser emitter is clean and unobstructed.
Clean the double guide rails to remove any dust or debris. Apply a small amount of light machine oil to the rails for smoother movement.
Setup:
Compatibility:
Care:
