Spokey MrFIT inline skates - 42 GR M
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Spokey MrFIT 42 GR M inline skates are designed for individuals seeking fast, dynamic fitness skating. They offer a smooth ride and excellent foot support, ideal for active leisure and improving well-being. A potential consideration is that while suitable for beginners, advanced users might seek more specialized features.
All features
| Model Part Number | 940755 |
|---|---|
| Brand | Spokey |
Extended Product Information
FAQs
What is the maximum weight limit for these skates?
The Spokey MrFIT 42 GR M inline skates have a maximum user weight limit of 100 kg.
Are these skates suitable for rough terrain?
While the ANTISHOCK heel inserts and composite skid help absorb vibrations, these skates are primarily designed for smooth, hard surfaces like pavement and roller rinks. They are not intended for off-road use.
How do I choose the correct size?
Refer to the insert length for size 42, which is 27.1 cm. It's recommended to measure your foot and compare it to the provided sizing information to ensure a proper fit.
What maintenance do the ABEC-7 Carbon bearings require?
Keep the bearings clean and dry. Periodic cleaning with a solvent and re-lubrication will maintain their smooth performance. Avoid exposure to water and excessive dust.
Can I replace the wheels if they wear out?
Yes, the wheels can be replaced. Ensure you use compatible 80x20 mm, 82A PU wheels and follow proper installation procedures.
What is the primary benefit of the triple fastening system?
The triple fastening system (laces, Velcro, buckle) ensures a secure, anatomical fit that maintains the foot's correct position, enhances balance, and helps prevent injuries by reducing heel movement.
Troubleshooting
Skates feel too loose or unstable
Adjust the laces, Velcro strap, and two-section buckle for a tighter, more secure fit. Ensure the boot is fully cinched around the ankle and midfoot.
Wheels are not spinning freely
Check the bearings for debris or dirt. Clean and lubricate them if necessary. Ensure the wheels are not overtightened against the frame.
Reduced smoothness or increased vibration
Inspect the wheels for damage or embedded objects. Check the composite skid for any blockages or wear. Clean or replace the bearings if they are worn out.
Discomfort or pressure points
Loosen the fastening system slightly in the affected areas. Ensure the correct skate size has been selected, referencing the insert length.
Pros and Cons
Pros
- Smooth rolling performance due to quality wheels and bearings.
- Enhanced comfort and stability from the anatomical inner shoe and triple fastening.
- Vibration absorption for a more pleasant experience on varied terrains.
- Suitable for both beginners and intermediate fitness skaters.
- Promotes active lifestyle and well-being.
Cons
- May not offer the advanced features required by professional or highly experienced skaters.
- The composite skid, while absorbent, might offer less direct feedback on certain surfaces.
- Maximum user weight limit of 100 kg.
- Specific to size 42 (27.1 cm insert length), requiring careful selection for proper fit.
Setup, Compatibility & Care
Setup: The Spokey MrFIT 42 GR M inline skates come pre-assembled. Ensure the triple fastening system (laces, Velcro strap, and buckle) is adjusted for a snug, comfortable fit before each use. The fit should be secure enough to prevent foot movement within the boot but not so tight as to restrict circulation.
Compatibility: These skates are designed for fitness skating on smooth, hard surfaces such as pavement, asphalt, and dedicated roller rinks. They are compliant with the EN 13843 standard and have a maximum user weight limit of 100 kg. Ensure your selected size corresponds to the recommended insert length (27.1 cm for size 42) for optimal performance and safety.
Care:
- Cleaning: Wipe the exterior of the skates with a damp cloth. Avoid using harsh detergents. The inner shoe can be removed for separate cleaning if necessary, following the manufacturer's instructions (typically hand wash and air dry).
- Bearings: Keep bearings clean and dry. If they become dirty, they can be carefully removed, cleaned with a suitable solvent, and re-lubricated. Avoid skating through water or excessively dusty environments.
- Wheels: Regularly check wheel wear and rotate them if necessary to ensure even wear patterns. Replace wheels if they become significantly worn or damaged.
- Storage: Store skates in a cool, dry place away from direct sunlight to prevent material degradation.