Best current price£50.00from Evans Cycles UK
Shopping.co.uk recommended and popular offers
Evans Cycles UK£50.00Visit shop Sram Centreline 180Mm 00 Silver
Visit shop
Frasers£50.00Visit shop Sram Centreline 180Mm 00 - Silver
Visit shop3 offers from £50.00
View price history by clicking the chart icon.
The SRAM CenterLine 180mm brake rotor is designed for mountain and road cyclists who prioritize consistent, quiet, and reliable braking performance. Its refined design featuring rounded edges makes wheel installation easier while meeting professional UCI standards, though users should ensure their frame and brake caliper clearance supports the 180mm diameter before upgrading.
| Series | Centerline |
|---|---|
| Model Part Number | 710845914935 |
| Brand | SRAM |
Yes, it is designed to be compatible with most SRAM road and mountain bike braking systems, provided your frame supports 180mm rotors.
Yes, it is highly recommended to perform a standard bedding-in process by completing several controlled, firm stops to ensure optimal transfer of pad material.
Absolutely. The CenterLine design is UCI-compliant and widely used in professional road disc braking setups.
You will need a T25 Torx wrench to tighten the six mounting bolts.
Inspect the rotor for thinning; if it falls below the minimum thickness marked on the spider, it is time for a replacement.
Clean the rotor surface with Isopropyl alcohol and ensure your brake pads are not contaminated with oil or grease.
Check that the rotor bolts are torqued correctly and that the rotor is perfectly centered between the brake pads.
Loosen the caliper mounting bolts, squeeze the brake lever firmly, and re-tighten the bolts to re-align the caliper over the rotor.
To install your SRAM CenterLine rotor, use a standard Torx T25 wrench to secure the rotor bolts in a star pattern to ensure even pressure. Always ensure that your frame or fork is rated for 180mm rotors; if transitioning from a smaller size, you will need a 180mm post-mount adapter for your caliper. Keep the rotor clean by wiping it with Isopropyl alcohol periodically to remove oil or debris. Avoid touching the braking surface with your bare hands, as natural skin oils can lead to temporary performance loss or noise.
