Best current price£88.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£88.00Visit shop - Hardco Ri Herrin Nordic 944 Wood Effect Spc Click Lvt Flooring-Herringbone (5.2mm) For Domestic & Commercial Use 2.38M² Per Pack
Visit shop3 offers from £88.00 - £97.00
View price history by clicking the chart icon.
This Vinyl Flooring UK Hardcore Rigid Herringbone SPC Click LVT Flooring is designed for homeowners and light commercial users seeking a stylish and durable flooring solution. Its key benefit is the combination of a classic herringbone pattern with the robust performance of SPC rigid core technology, offering both aesthetic appeal and practical resilience. A potential caveat is that while durable, the 0.30mm wear layer may not be suitable for extremely heavy commercial traffic. This flooring features a realistic wood-effect finish, a click-lock installation system, and a 5.2mm thickness with a built-in underlay for added comfort and insulation.
| Model Part Number | 9503275751437 |
|---|---|
| Brand | Vinyl Flooring UK |
SPC stands for Stone Plastic Composite. It's a type of Luxury Vinyl Tile (LVT) that uses a dense, stable core made from limestone powder and stabilizers. This provides exceptional durability, rigidity, and water resistance.
Yes, this flooring is water-resistant and ideal for moisture-prone areas like bathrooms and kitchens due to its SPC core construction. However, avoid leaving standing water for extended periods.
Calculate the square meterage of your room by multiplying its length by its width. Always add an extra 10-15% to account for cuts, waste, and potential future repairs.
The built-in underlay provides adequate comfort, sound, and heat insulation for most applications. Additional underlayment is generally not required or recommended with this product.
The wear layer is 0.30mm (or 12 mil). This protective top layer shields the flooring from scratches, stains, and general wear. A thicker wear layer generally indicates greater durability for higher traffic.
The planks are designed with specific click mechanisms that allow them to be interlocked at the correct angles to form the distinctive herringbone pattern. Installation requires careful planning and precise cuts.
Yes, you can install it over existing hard, flat, and securely adhered tiles. Ensure the grout lines are not too deep, as they may telegraph through. If grout lines are deep, a suitable leveling compound may be needed.
Ensure the subfloor is perfectly level and clean. Check the click mechanism on both planks for damage or debris. Ensure planks are angled correctly during fitting and pushed firmly together.
This can occur if the subfloor is uneven or if planks were not fully engaged during installation. Carefully inspect and re-lock any loose joints. Ensure expansion gaps are maintained around the perimeter of the room.
Protect the floor from sharp objects and heavy furniture by using felt pads on furniture legs. Avoid dragging items across the surface. For minor scuffs, a gentle cleaner may help; for deeper damage, plank replacement might be necessary.
This often indicates an uneven subfloor or insufficient underlayment preparation. Ensure the subfloor meets the required flatness standards. Verify that the built-in underlay is not compressed unevenly.
Setup: Ensure your subfloor is clean, dry, level, and smooth before installation. Remove any dust, debris, or old adhesive. The click-lock system requires precise alignment; ensure each plank locks securely into the previous one. For a clean edge finish, a 4-sided micro bevel is incorporated. Install planks perpendicular to the main light source in the room for the best visual effect.
Compatibility: This flooring is compatible with underfloor heating systems, provided the temperature does not exceed manufacturer recommendations (typically 27°C or 82°F). It is suitable for heavy domestic and light commercial usage. It can be installed over most existing hard, flat subfloors.
Care: Regular sweeping or vacuuming will remove loose dirt and grit. For deeper cleaning, use a damp (not wet) mop with a mild, pH-neutral cleaning solution. Avoid abrasive cleaners, excessive water, or steam mops, as these can damage the wear layer or the locking system. Promptly wipe up any spills to prevent water ingress.
