Shopping.co.uk

DeWalt Metal Cutting Disc - 125mm

DeWalt Metal Cutting Disc - 125mm

This DeWalt Metal Cutting Disc is designed for general metal grinding work and cutting on stainles...

Best current price£4.91from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £4.91 - £10.45

View price history by clicking the chart icon.

eBayDeWalt Disc 125mm For Metal Steel Depressed Centre 3mm DPC Angle Grinder Wheel
Free delivery in 1–3 days
£4.91
Visit shop

Product Information

Full details

This guide is for users of the DeWalt Metal Cutting Disc - 125mm, designed for efficient metal cutting. It offers enhanced performance, particularly with cordless tools, but users should be aware of the importance of adhering to safety guidelines when operating the disc.

All features

Model Part NumberDT43911-QZ
BrandDeWalt

Extended Product Information

FAQs

What materials can this cutting disc cut?

The DeWalt Metal Cutting Disc - 125mm is designed for cutting stainless steel, ferrous, and non-ferrous metals.

What is the maximum operating speed of the disc?

The maximum operating speed is 80m/s.

What size grinder is this disc compatible with?

It is compatible with angle grinders that accept a 125mm disc with a 22.23mm bore.

How should I store the cutting discs?

Store the discs in a dry place, away from moisture and extreme temperatures.

What safety precautions should I take?

Always wear appropriate personal protective equipment (PPE), including eye protection, gloves, and a dust mask or respirator. Ensure the disc is properly mounted on the grinder and that the workpiece is securely held.

How do I know if the disc is worn out?

If the disc diameter has reduced significantly or if there are any signs of damage (cracks, chips), it is time to replace it.

Is this disc suitable for use with cordless grinders?

Yes, this disc is designed for optimal performance with cordless tools.

Troubleshooting

Disc is wearing down too quickly.

Ensure the correct pressure is applied and that the disc is appropriate for the material being cut. Check for any obstructions or excessive friction.

Disc is vibrating excessively.

Check that the disc is correctly mounted and that the securing nut is tight. If the vibration persists, the disc may be damaged and should be replaced.

Cuts are not clean or are difficult to make.

Check the disc's condition. Replace a worn or damaged disc. Ensure you are using the correct speed and pressure for the material.

Pros and Cons

Pros

  • Enhanced cutting performance on various metals.
  • Longer disc life due to the aluminum oxide grain formulation.
  • Optimized for use with cordless tools, increasing mobility.
  • OSA accredited, ensuring safety standards are met.
  • Suitable for a range of metalworking applications.

Cons

  • Requires proper safety gear to operate.
  • May wear down faster with intensive use.
  • Specific to metal cutting; not suitable for other materials.
  • Performance can vary depending on the metal type.
  • Requires using the correct grinder.

Setup, Compatibility & Care

Setup:

  1. Ensure the grinder is turned off and unplugged from the power source.
  2. Refer to the grinder's manual for instructions on how to change the cutting disc.
  3. Carefully align the disc with the grinder's spindle and tighten the securing nut.
  4. Ensure the disc is firmly secured before use.

Compatibility:

  • Compatible with angle grinders that accept a 125mm disc with a 22.23mm bore.
  • Suitable for use on stainless steel, ferrous, and non-ferrous metals.

Care:

  • Store the discs in a dry place, away from moisture and extreme temperatures.
  • Inspect the disc for any signs of damage (cracks, chips) before each use.
  • Do not exceed the maximum operating speed (80m/s).
  • Use appropriate PPE during all operations.

Price History

DatePrice
Visit shop