Best current price£28.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£28.90Visit shop VEVOR Screen Printing Kit Silk Screen Printing Frame 25.4 cm x 35.6 cm 156 Count Mesh 6pcs
Visit shop1 offer from £28.90
View price history by clicking the chart icon.
The VEVOR 6-Piece Screen Printing Kit is designed for hobbyists and professional printers looking for a reliable, durable solution for high-quality ink transfers. Featuring 10x14 inch aluminum frames with 156 mesh, this kit provides a stable platform for printing on diverse surfaces like textiles, wood, and glass; however, users should note that this kit includes frames and prep accessories but requires the purchase of separate screen printing inks and a squeegee to complete the setup.
| Colour | Silver |
|---|---|
| Model Part Number | SYKJD61561014ONC9V0 |
| Brand | VEVOR |
Yes, these screens are compatible with standard water-based and plastisol screen printing inks.
No, you should hand clean the frames using screen-appropriate solvents and warm water to avoid damaging the adhesive.
While the frame is 10x14 inches, you should leave a 1-2 inch margin around the edges, making the optimal design area approximately 8x12 inches.
No, these frames come pre-stretched with high-tension mesh ready for immediate use.
Yes, the 156 mesh is an industry-standard count that works well with most direct photo emulsions.
Ensure the provided silver tape is applied smoothly and covers the entire gap between the mesh and the frame edge.
Ensure you are not applying excessive pressure with the squeegee, which can stretch the fabric over time.
Check if the mesh is clogged with dried ink; perform a deep clean with a screen-safe solvent or degreaser.
To begin using your kit, ensure your screen is clean and free of debris. Use the provided silver tape to seal the inner edges where the mesh meets the aluminum frame; this prevents ink from building up in the corners. When printing, always secure your screen to a stable platen or hinge clamp. For care, clean the screens immediately after use to prevent ink from drying and clogging the mesh. The frames are designed to be cleaned in four simple steps: remove excess ink, apply appropriate cleaning solvent, rinse with water, and let dry completely before the next application.
