DELTA FAUCET Shower Head - Chrome - 2.5 GPM
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This DELTA FAUCET shower head is designed for users seeking a powerful shower experience, especially in areas with low water pressure, thanks to its high-intensity spray and 2.5 GPM flow rate. Constructed from solid brass with a chrome finish, it offers durability and a sleek look. A potential consideration is its consistent 2.5 GPM flow, which may not be ideal for those looking to conserve water beyond standard regulations.
All features
| Model Part Number | 52652-PK |
|---|---|
| Brand | DELTA FAUCET |
Extended Product Information
FAQs
What is the GPM (gallons per minute) of this shower head?
This DELTA FAUCET shower head operates at a flow rate of 2.5 gallons per minute.
Is this shower head easy to install?
Yes, it is designed for standard installation on any 1/2-inch threaded shower arm and typically requires no special tools beyond what you might already have.
Will this shower head work well if my home has low water pressure?
Yes, it is specifically designed to provide a high-intensity spray and perform effectively even in situations with low water pressure.
What material is the shower head made of?
The shower head is constructed from solid brass for durability.
How should I clean and maintain the chrome finish?
Clean regularly with a soft, damp cloth. Avoid abrasive cleaners. For mineral buildup, use a mild vinegar and water solution.
Can I adjust the spray settings?
This model features a high-intensity spray and does not have adjustable spray settings. Its design is focused on providing a consistent, powerful spray.
Does it meet water conservation standards?
With a 2.5 GPM flow rate, it meets current federal standards for water efficiency in showerheads.
Troubleshooting
Low water pressure from the shower head
Ensure the shower arm threads are clean and the shower head is properly tightened. Check if the flow restrictor (if applicable and accessible) is clogged or blocked. Verify that the main water supply to the home is adequate and that no other fixtures are drawing significant water simultaneously.
Spray pattern is uneven or weak
Clean the spray nozzles. Gently rub the nozzles with your finger or a soft brush to dislodge any mineral deposits. If the issue persists, check for any internal blockages within the shower head.
Leaking from the connection point
Ensure plumber's tape has been applied to the shower arm threads before attaching the shower head. Tighten the connection slightly, but avoid overtightening. If leaking continues, inspect the internal washer or gasket for damage and replace if necessary.
Pros and Cons
Pros
- Powerful high-intensity spray
- Effective performance even with low water pressure
- Durable solid brass construction
- Stylish and easy-to-clean chrome finish
- Standard flow rate suitable for thorough rinsing
Cons
- Fixed 2.5 GPM flow rate may not suit extreme water conservation efforts
- Might be too powerful for users preferring a gentler shower experience
- Requires standard shower arm for installation
Setup, Compatibility & Care
Setup: This shower head is designed for straightforward installation onto any standard U.S. shower arm. Typically, this involves unscrewing your old shower head, cleaning the threads on the shower arm, applying plumber's tape (if needed), and then screwing on the new DELTA FAUCET shower head. Hand-tightening is usually sufficient, followed by a quarter-turn with a wrench if necessary, being careful not to overtighten.
Compatibility: The shower head is compatible with all standard 1/2-inch threaded shower arms found in most homes. It is designed to operate efficiently within standard household water pressure ranges and specifically optimized for scenarios with lower water pressure.
Care: To maintain the chrome finish and ensure optimal performance, clean the shower head regularly with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish. For any mineral buildup, a solution of mild vinegar and water can be used, allowing it to soak briefly before wiping clean and rinsing thoroughly.