Halo Tubeless Rim Tape - 30mm - Blue
Best current price£12.74from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£12.74Visit shop Halo Blue Tubeless Rim Tape 5.5M
Visit shopTredz£12.74Visit shop One Offer
1 offer from £12.74
View price history by clicking the chart icon.
Product Information
Full details
The Halo Tubeless Rim Tape is designed for adult cyclists seeking a reliable, self-adhesive solution for setting up tubeless wheel systems. Its key benefit is ensuring an airtight seal under high pressure, crucial for tubeless performance. A potential caveat is the need for precise application to guarantee optimal sealing. This tape is available in a 30mm width and blue color, with each pack containing two 5.5m rolls sufficient for two wheels.
All features
| Age Group | adult |
|---|---|
| Colour | Blue |
| Gender | Unisex |
| Model Part Number | RMRTHAU30 |
| Brand | Halo |
Extended Product Information
FAQs
How long does the tape typically last?
With proper installation and care, Halo Tubeless Rim Tape can last for several years. It should be inspected periodically, and replacement may be necessary if signs of wear, lifting, or adhesive failure appear.
Can I use this tape on carbon rims?
Yes, this tape is generally suitable for use on tubeless-ready carbon rims, provided the rim manufacturer approves of tubeless tape applications. Always verify compatibility with your specific rim.
What is the best way to clean adhesive residue after removing old tape?
Isopropyl alcohol is highly effective for removing tubeless rim tape adhesive. Apply it to a cloth and gently rub the residue until it dissolves. A plastic scraper can also help lift larger pieces before using alcohol.
Do I need to use rim strips with this tape?
No, this tape is designed to be the primary seal for tubeless rims. It creates the airtight barrier directly on the rim bed, eliminating the need for separate rim strips.
How much tape is needed per wheel?
Each 5.5m roll is typically sufficient for one wheel, meaning a 2-roll pack can cover two wheels for most standard bicycle rim sizes.
Can this tape be used for tubeless conversion on non-tubeless rims?
This tape is specifically designed for tubeless-ready (TLR) or UST rims. It is not intended for converting standard clincher rims, as they lack the necessary rim bed profile and strength for tubeless use.
Troubleshooting
Air leaking from the rim bed or spoke holes.
Ensure the rim was thoroughly cleaned before application. Reapply the tape, ensuring it is centered and firmly pressed down, completely covering all spoke holes. Check that the tape is not torn or wrinkled. Allow adequate curing time before inflation.
Tape is difficult to apply evenly.
Slightly warm the tape with a hairdryer on a low setting can make it more pliable. Apply steady, even pressure during installation, and avoid stretching it excessively, which can lead to shrinkage or tearing.
Air leaks around the tubeless valve.
Ensure the valve stem is correctly seated and the lockring is tightened sufficiently. Check that the tape has created a solid seal around the valve hole. If the tape was punctured during valve installation, it may need to be reapplied.
Tape does not seem to be adhering well.
Confirm the rim surface was completely clean and dry prior to application. Ensure no pressure was applied to the tape until the adhesive had sufficient time to bond (ideally 24 hours).
Pros and Cons
Pros
- Provides a secure and reliable tubeless seal.
- Easy to apply with its self-adhesive backing.
- Durable construction for long-lasting performance.
- Sufficient quantity for two wheels per pack.
- Available in various widths to fit different rims.
Cons
- Requires careful application to avoid air leaks.
- Specific width (30mm) may not suit all rim profiles.
- Not suitable for use with inner tubes.
- Adhesive may be difficult to reposition once applied.
Setup, Compatibility & Care
Setup:
- Ensure the rim bed is clean, dry, and free from any old tape residue or grease.
- Carefully unroll the tape, applying it around the rim bed, starting opposite the valve hole.
- Apply firm, even pressure as you lay the tape down, working your way around the rim. Avoid stretching the tape excessively.
- Overlap the tape by approximately 10-15 cm at the end.
- Cut the tape cleanly.
- Ensure the tape completely covers the spoke holes and creates a continuous seal.
- Install a tubeless valve through the rim (and tape if necessary, often through a pre-drilled hole). Ensure the valve is securely seated.
- Allow the adhesive to cure for at least 24 hours before mounting the tire and inflating.
Compatibility:
- This tape is designed for tubeless-ready (TLR) or UST rims only.
- It is not compatible with standard clincher rims intended for use with inner tubes.
- The 30mm width is suitable for rims with an internal width generally ranging from 20mm to 27mm. Always check your rim manufacturer's recommendations.
Care:
- Keep the tape away from excessive heat and direct sunlight when not in use.
- If removing old tape, use a plastic scraper or isopropyl alcohol to gently remove adhesive residue to avoid damaging the rim.
- Do not use solvents or sharp objects that could damage the rim or remaining tape.