Best current price£344.00from eBay
Shopping.co.uk recommended and popular offers
eBay£344.00Visit shop EarthQuaker Devices Scrolls Bass Overdrive & EQ Effects Pedal
Visit shop1 offer from £344.00
View price history by clicking the chart icon.
This guide is for bassists seeking comprehensive control over their tone and dynamics. The EarthQuaker Devices Scrolls Bass Overdrive & EQ Effects Pedal offers a dual-channel approach to signal processing, providing both tube-like overdrive and precise EQ shaping. A potential caveat is its advanced feature set, which may require some time to master for new users. Key features include a dedicated overdrive channel, an active EQ with flexible controls, integrated effects loop, and a speaker-emulating XLR output.
| Model Part Number | EQSCRLV1 |
|---|---|
| Brand | EarthQuaker Devices |
The pedal requires a standard 9V DC power supply with a center-negative tip. Ensure the power supply provides at least 100mA of current.
Yes, you can use either the Drive channel or the EQ channel independently by engaging or bypassing them. You can also use them together in series.
The Variable Frequency control allows you to select the specific frequency that the Middle control will affect, offering precise control over the midrange character of your tone.
No, the pedal does not require phantom power. It is designed to provide a line-level signal to your mixer or audio interface.
The effects loop is positioned between the Drive channel's output and the EQ channel's input, allowing you to process specific effects after overdrive but before final EQ shaping.
The 'Deep' switch adds a low-end boost to the signal, providing more fullness and weight to your tone, especially useful for playing in drop tunings or when a more massive sound is desired.
Yes, the pedal is designed for electric bass and features robust low-end capabilities, making it suitable for 5-string basses and extended range instruments.
Verify that the pedal is powered on. Check all cable connections at the input, output, and amplifier. Ensure the correct input and output jacks are being used. Test with a different instrument cable.
Engage the `GROUND LIFT` switch. Try a different XLR cable or a different input channel on your mixer/interface. Ensure your power supply is properly isolated.
Ensure the Drive channel is bypassed correctly. Check that the Gain knob on the Drive channel is turned down if you intend to use it only for its tone shaping. Confirm the `PROCESS` switch is in the desired position.
Confirm that the EQ channel is active and not bypassed. Ensure the `PROCESS` switch is not set to bypass the EQ section entirely. Check that the EQ controls are not all set to their center positions if you are expecting a significant change.
Setup:
Compatibility:
Care:
