BG Brushed Steel Single 13A Switched Socket - Grey Inserts
Best current price£8.40from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£8.40Visit shop B&Q - Brushed Steel Single 13A Switched Socket & Grey Inserts
Visit shopB&Q£8.40Visit shop One Offer
1 offer from £8.40
View price history by clicking the chart icon.
B&QB&Q - Brushed Steel Single 13A Switched Socket & Grey Inserts
Free delivery in 1–3 days
£8.40
Visit shop
Product Information
Full details
This BG brushed steel single 13A switched socket is designed for electricians and homeowners seeking a stylish and easy-to-install electrical outlet. Its key benefit is the combination of a modern aesthetic with practical installation features, though its single socket design limits simultaneous device connections.
All features
| Brand | BG |
|---|
Extended Product Information
FAQs
Can this socket be used outdoors?
While the socket includes a moisture control gasket, it is designed for indoor use and is not rated as weatherproof. Outdoor installation is not recommended.
What is the maximum wattage this socket can handle?
The socket is rated for 13 Amps. At 230V, this equates to a maximum load of approximately 2990 Watts (3000W). Always check the power requirements of your appliances.
Do I need an electrician to install this socket?
Installation involves mains electricity and should only be carried out by someone competent and knowledgeable in electrical work, or by a qualified electrician, to ensure safety and compliance with regulations.
How do I clean the brushed steel finish?
Use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. Always ensure power is off before cleaning.
What type of wall box is required?
This socket is designed to retrofit into a standard UK 25mm depth wall box.
Does the switch provide surge protection?
No, the switch on this socket is for turning power on and off to the device. It does not provide surge protection.
Troubleshooting
Socket not powering connected devices
Ensure the circuit breaker at the consumer unit is switched on. Verify that the wiring to the socket is correct and secure. Check that the individual switch on the socket is in the 'on' position. If problems persist, turn off power and re-check connections or consult a qualified electrician.
Switch feels loose or stiff
This may indicate an internal issue. Ensure power is off and inspect the switch mechanism. If there is no obvious external cause, it may require replacement.
Front plate is loose
Check that the fixing screws securing the socket to the wall box are tightened. Ensure the decorative faceplate is correctly aligned and its screws are snug.
Pros and Cons
Pros
- Modern and stylish brushed steel finish
- Ease of installation with captive screws and angled terminals
- Integrated moisture control for added protection
- Slim profile enhances aesthetic appeal
- Fits standard 25mm back boxes for simple retrofitting
Cons
- Single socket limits the number of devices that can be connected at once
- May require specific tools for installation
- Brushed steel finish can show fingerprints if not maintained
- Requires basic electrical knowledge for safe installation
Setup, Compatibility & Care
Setup:
- Safety First: Ensure the power supply to the circuit is turned off at the consumer unit (fuse box) before starting.
- Remove Old Socket: Carefully unscrew and remove the existing socket faceplate and disconnect the wiring.
- Prepare Wiring: Feed the wires through the BG socket's opening and connect them to the appropriately labelled terminals (Live, Neutral, Earth). Use the angled, in-line, colour-coded terminals for ease of connection.
- Secure Socket: Gently push the socket back into the standard 25mm wall box, ensuring the moisture gasket is correctly positioned. Secure the socket using the provided colour-matched fixing screws.
- Attach Faceplate: Fit the brushed steel decorative faceplate and secure it with its matching screws.
- Restore Power: Turn the power supply back on at the consumer unit and test the socket.
Compatibility:
- This socket is designed to fit into a standard 25mm (minimum depth) UK wall box.
- It is compatible with standard 2.5mm² or 1.5mm² twin and earth cable.
- Rated for a maximum load of 13 Amps.
Care:
- To clean, first switch off the power at the mains.
- Wipe the surface with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the brushed steel finish.
- Ensure the socket is completely dry before restoring power.