d-c-fix Self Adhesive Matt Slate Vinyl Film - Black
Revamp your space with this d-c-fix Self Adhesive Matt Slate Vinyl Film. Sleek and stylish, this v...Revamp your space with this d-c-fix Self Adhesive Matt Slate Vinyl Film. Sleek and stylish, this vinyl film features a textured design that will instantly transform any surface. It is perfect for covering clean flat surfaces around the home including kitchen doors, furniture, desktops, shelves, windowsills, dressing tables, drawer fronts and bathroom vanities. dc fix stone marble or tile sticky back plastic designs give your worktop or splashback a high end finish, on a budget. Renovate tired surfaces with this quality vinyl kitchen wrap, whether it's an industrial look you're after or a sleek marble finish. dc fix has a 5* rating for adhesion, opacity, light fastness, shrinkage and durability. The water based low tack adhesive allows the vinyl to be repositioned during application. Quick and easy to apply to clean, smooth flat surfaces. Simply remove the backing paper little by little and smooth into place, moving the smoother side to side to eliminate air bubbles. If you make a mistake, peel back and start again.The film is heat resistant to 75°C so OK for hot cups and plates but not hot pans. Always keep at least 12 inches away from naked flames and use a worktop saver for cutting, do not cut directly on the vinyl. Wipe clean with a regular household cleaner and wipe up spillages that may stain straight away (e.g. curry).Sticky back plastic is a non-permanent DIY solution for updating surfaces in the home, perfect for tenants and landlords looking for a quick, easy and budget-friendly way of updating kitchen doors or rejuvenating old worktops. It's also perfect for upcycling items of furniture. The film is fully removable - use a hairdryer to soften the adhesive first and warm soapy water to remove any remaining residue.Brand: d-c-fixSelf adhesivePVC (Polyvinyl Chloride)Size approx. 67.5W cm x 2L m, 67.5W cm x 5L m, 67.5W cm x 15L mWe recommend using a dc fix smoother for best finish 2) use the handy grid on the backing paper as a cutting guide 3) use a sealant around sinks & hobs 4) spray a little water on smooth surfaces like glass & appliances 5) a hairdryer can be used on curved surfaces to make the vinyl more pliableFor instructions click here d-c-fix Steine Black Slate Matt Self Adhesive Film 2m x 675mm Self-adhesive vinyl film with shiny printed metallic surface Ideal for furniture makeovers Easy to apply Wipe clean & durable High quality vinyl Heat resistant up to 70 degrees C Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.
This guide is for anyone looking to quickly and affordably update their home surfaces with the d-c-fix Self Adhesive Matt Slate Vinyl Film. The key benefit is the ability to transform kitchen doors, furniture, and other surfaces with a stylish, textured slate design, on a budget. However, note that while it's heat-resistant up to 75°C, it's not suitable for direct contact with hot pans or open flames. This guide covers everything from application to care, ensuring you get the most out of your d-c-fix film.
All features
Colour
Black
Brand
d-c-fix
Extended Product Information
FAQs
How do I clean the d-c-fix film?
Wipe the film with a regular household cleaner and a damp cloth. Avoid using abrasive cleaners or scrub brushes.
Can I use this film on a textured surface?
The film works best on smooth, flat surfaces. Textured surfaces may affect adhesion.
Is the film waterproof?
The film is water-resistant. Wipe up any spills immediately to prevent water damage. Use sealant around sinks and hobs.
How do I remove the film?
Use a hairdryer to soften the adhesive. Gently peel off the film. Use warm soapy water to remove any remaining adhesive residue.
Can I cut the film with scissors?
While you can use scissors, it's recommended to use a sharp blade and a straight edge for precise cuts, using the grid on the backing paper as a guide.
Is the film suitable for outdoor use?
No, the film is designed for indoor use only.
Can I put hot items directly on the film?
The film is heat-resistant up to 75°C. Avoid placing hot pans or items directly on the surface. Use a worktop saver.
Troubleshooting
Air bubbles under the film.
Lift the film and reapply, smoothing out the bubbles with a smoother or soft cloth. Alternatively, use a pin to prick the bubble and smooth it down.
Film not sticking properly.
Ensure the surface is clean and dry. Make sure you are using enough pressure during application.
Film is peeling at the edges.
Use a hairdryer to soften the adhesive and press the edges firmly onto the surface. Apply sealant to the edges.
Difficulty removing the backing paper.
Carefully peel the backing paper from a corner, ensuring the film doesn't stick to itself. If necessary, use a sharp blade to separate the backing.
Pros and Cons
Pros
Budget-friendly way to update your home.
Easy to apply with repositionable adhesive.
Provides a stylish, textured slate finish.
Suitable for a wide range of applications.
Fully removable, ideal for renters.
Durable and long-lasting.
Cons
Not suitable for direct contact with hot pans or open flames.
Requires a clean, smooth, and flat surface for optimal adhesion.
Cutting directly on the vinyl is not recommended; use a worktop saver.
Spillages that may stain, such as curry, should be wiped immediately.
Setup, Compatibility & Care
Setup
Surface Preparation: Ensure the surface is clean, smooth, and dry. Remove any dust, grease, or debris.
Cutting: Use the grid on the backing paper as a cutting guide. Measure and cut the film to the desired size, leaving a slight overlap.
Application: Slowly remove the backing paper, and smooth the film onto the surface, working from one side to the other to eliminate air bubbles. Use a d-c-fix smoother for best results. Spraying water on glass and appliances can help with the application.
Finishing: Trim any excess film with a sharp blade.
Curved Surfaces: A hairdryer can be used on curved surfaces to make the vinyl more pliable.
Sealant: Use a sealant around sinks and hobs to prevent water damage.
Compatibility
The d-c-fix film is compatible with clean, smooth, flat surfaces like:
Kitchen doors and cabinets
Furniture (desks, dressers, shelves)
Countertops and worktops
Windowsills and desktops
Care
Wipe clean with a regular household cleaner.
Wipe up spillages immediately to prevent staining.
Avoid using abrasive cleaners or scrub brushes.
The film is heat resistant up to 75°C; do not place hot pans or expose to open flames.