Best current price£36.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£36.79Visit shop B&Q - Glue Brush On 5G (11 Pack)Fast-Drying Clear Cyanoacrylate + Applicator BrushWaterproofShock & Temperature Resistant
Visit shop1 offer from £36.79
View price history by clicking the chart icon.
The Loctite Glue Brush On 5g (11 Pack) is designed for users who require frequent, precise bonding for heavy-duty repairs and DIY projects. Its key benefit is the controlled application and fast-drying formula, ensuring strong, invisible repairs. A minor caveat is its unsuitability for polyethylene and polypropylene plastics. This pack provides eleven 5g bottles of advanced cyanoacrylate adhesive, totaling 55g, featuring a built-in brush applicator for smooth coverage on various surfaces. It bonds in seconds, dries clear, and offers durable resistance to water, shock, and temperature changes.
| Colour | White |
|---|---|
| Brand | Loctite |
Loctite Glue Brush On bonds in seconds, allowing for immediate handling of repaired items. Full cure for maximum strength typically occurs within a few hours, but varies based on materials and environmental conditions.
Yes, it can be used on fabrics like leather and paper. For most fabrics, it creates a strong bond, but testing on an inconspicuous area is recommended to ensure compatibility and desired flexibility.
Unopened bottles typically have a shelf life of 1-2 years when stored properly in a cool, dry place. Once opened, it's best to use within 6 months for optimal performance.
Yes, the cured adhesive is waterproof, making it suitable for repairs on items that may come into contact with water.
It is not recommended for use on surfaces that come into direct contact with food, as the adhesive is not food-safe.
Wipe away any excess wet glue immediately with a dry cloth. Once cured, hardened glue can often be carefully chipped or sanded away. For skin, use warm soapy water or acetone-based nail polish remover.
The key difference is the brush applicator, which provides more controlled and even spreading, especially useful for larger or irregularly shaped surfaces compared to a nozzle applicator.
Ensure the nozzle is not blocked. Check if the cap is properly removed. If the brush is dry, it may need to be rehydrated slightly with a drop of water (use sparingly) or replaced with a new bottle.
Verify that surfaces were clean, dry, and free of contaminants like oil or dust. Ensure sufficient adhesive was applied and that the correct materials were bonded (avoiding PE/PP). Allow adequate curing time for full strength, though it bonds in seconds.
Work efficiently and apply the adhesive promptly after opening the bottle. Close the cap immediately after use to minimize exposure to air. If the brush has dried out, carefully remove hardened glue.
Do not pull bonded skin apart. Soak the affected area in warm, soapy water and gently try to roll or peel the skin apart. For stubborn bonds, use a small amount of nail polish remover (containing acetone) on a cotton swab and apply it to the bonded area, allowing it to work on the adhesive before gently peeling.
Setup: No setup is required. Ensure the surfaces to be bonded are clean, dry, and free from dust or grease. For best results, test on an inconspicuous area first.
Compatibility: Suitable for a wide range of materials including metal, wood, ceramic, rubber, paper, and most plastics. *Note: Not suitable for polyethylene (PE), polypropylene (PP), or fluorinated plastics. Avoid use on painted surfaces where finish may be affected.*
Care: After each use, ensure the cap is tightly sealed to prevent drying. Store bottles in a cool, dry place away from direct sunlight and heat. Clean up any excess adhesive before it cures using a dry cloth or by carefully peeling it off once fully hardened. For skin contact, do not force separation; use warm, soapy water or nail polish remover (acetone) cautiously.
