Best current price£8.79from Rackhams
Shopping.co.uk recommended and popular offers
Rackhams£8.79Visit shop Bell Lighting White B22 Dimmable Filament Led Golf Ball Bulbs, Warm 2700K 4.5W 40W Halogen Replacement Bayonet Cap - Pack Of 3
Visit shop
B&Q£10.49Visit shop B&Q - B22 Dimmable Filament Led Golf Ball Bulbs 3 Pack Warm White 2700K 4.5W 40W Halogen Replacement Bayonet Cap
Visit shop5 offers from £8.79 - £16.59
View price history by clicking the chart icon.
This guide is for anyone looking to add warm, energy-efficient lighting to decorative fixtures. The Bell Lighting B22 Dimmable LED Filament Golf Ball Bulbs offer a beautiful, vintage aesthetic with modern energy savings, consuming only 4.5W while mimicking a 40W incandescent bulb. A key caveat is their specific dimmer compatibility, requiring LED-rated trailing-edge dimmers and potential adjustment for optimal performance.
| Model Part Number | B22 |
|---|---|
| Brand | Bell Lighting |
These bulbs have a colour temperature of 2700K, providing a cosy and warm white light.
The product information does not specify outdoor suitability. It is recommended to use these bulbs in indoor dry locations only, unless the fixture is rated for outdoor use and provides adequate protection.
These bulbs are rated for a lifespan of up to 20,000 hours, offering long-term illumination.
No, these bulbs are not compatible with 3-way touch control lamps. They require specific LED-rated trailing-edge dimmers.
These 4.5W LED bulbs match the output of a 40W incandescent bulb, saving up to 88% on energy consumption.
Bell Lighting offers a 2-year warranty on these bulbs.
The bulbs are best used with LED-rated trailing-edge dimmers. Ensure the total wattage of LEDs on the circuit is within the dimmer's range. Consult your dimmer's compatibility list or Bell Lighting for specific recommendations.
Check that the bulb is securely screwed into the socket. Ensure the light switch is on and the power supply is active. Try the bulb in a different known working fixture to rule out a fixture issue.
This usually indicates a dimmer compatibility issue. Ensure you are using an LED-rated trailing-edge dimmer. Check that the total wattage of the LED bulbs on the circuit falls within the dimmer's recommended range. Try adjusting the dimmer to a different setting (avoiding extreme low or high settings) or consult the dimmer manufacturer's compatibility list.
Verify that the bulb is installed in a circuit controlled by a compatible LED dimmer. If using in a non-dimmable fixture, the bulb will operate at full brightness. Ensure the dimmer is switched on and set to a suitable level.
Ensure the bulb is properly seated in the socket. Check for any loose wiring in the fixture. If flickering persists on a dimmer, refer to the 'Bulb flickers or buzzes when dimmed' solution.
Setup:
Compatibility:
Care:
