Fiji Sand Matt Stone Effect Ceramic Indoor Wall Tile - Pack Of 10 - (L)400mm (W)250mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to add a natural, warm, and practical finish to their kitchen or bathroom walls. The Fiji Sand ceramic wall tiles offer a soft, stone-inspired aesthetic that creates a relaxed ambiance, with the primary benefit being their easy installation and maintenance for everyday living. A minor consideration is that while visually appealing, ceramic tiles are best suited for wall applications and not typically for high-traffic floor areas.
All features
| Model Part Number | Fiji Sand Matt Stone Effect Ceramic Indoor Wall Tile |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What is the size of each tile?
Each tile measures 250mm in width and 400mm in length (W)250mm (L)400mm.
How many tiles are in a pack?
Each pack contains 10 tiles.
What is the total coverage of one pack?
One pack of 10 tiles covers approximately 0.625 square meters (sqm).
Can these tiles be used in a shower area?
Yes, these ceramic tiles are suitable for use on walls in shower areas, provided they are installed with appropriate waterproof tile adhesive and grout, and the grout lines are properly sealed.
Are these tiles suitable for floors?
No, these tiles are specifically designed for wall applications and are not recommended for use on floors due to their ceramic composition and surface finish.
How do I clean the matt finish?
The matt finish can be cleaned using a soft cloth or sponge with mild detergent and water. Avoid abrasive cleaners to maintain the finish.
What is the recommended spacing for grout lines?
Typical grout line spacing for ceramic wall tiles is between 2mm and 5mm, depending on the desired aesthetic and manufacturer recommendations. Using tile spacers during installation helps achieve consistent results.
Troubleshooting
Uneven tile alignment
Use tile spacers during installation to ensure consistent gaps. If already installed, unevenness might be due to the wall surface or adhesive application. Minor adjustments may be possible with careful removal and re-application of adhesive.
Grout haze remaining after cleaning
Use a grout haze remover or a solution of white vinegar and water. Buff the surface with a clean, dry cloth after application. Ensure you are using a microfiber cloth for best results.
Tiles chipping during cutting
Ensure you are using a sharp ceramic tile cutter and applying steady, even pressure. Scoring the tile deeply before snapping can help achieve a cleaner break. Consider using a wet saw for more precise cuts on thicker tiles.
Adhesive not holding tiles
Verify that the wall surface is properly prepared (clean, dry, sound) and that the correct type of tile adhesive for ceramic wall tiles has been used. Ensure the adhesive is applied evenly and tiles are pressed firmly into place.
Pros and Cons
Pros
- Offers a natural and calming aesthetic.
- Easy to clean and maintain for daily use.
- Simple installation process suitable for DIY.
- Versatile design complements many kitchen and bathroom styles.
- Durable ceramic material designed for wall applications.
Cons
- Primarily intended for wall use; not recommended for floors.
- Ceramic can chip or crack if subjected to heavy impact.
- Requires proper grouting and sealing for optimal water resistance.
- Color may vary slightly between different batches.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface is clean, dry, and level.
- Apply tile adhesive suitable for ceramic wall tiles using a notched trowel.
- Place tiles with consistent spacing for grout lines, using tile spacers if necessary.
- Cut tiles as needed using a ceramic tile cutter.
- Allow adhesive to dry completely according to manufacturer instructions.
- Apply grout to fill the gaps between tiles.
- Clean off excess grout before it hardens.
- Once grout is dry, remove any remaining grout haze.
Compatibility:
- Suitable for interior wall applications in kitchens, bathrooms, and living areas.
- Not intended for floor use or areas subject to significant impact or abrasion.
- Compatible with most standard tile adhesives and grouts.
Care:
- Clean regularly with a soft cloth or sponge dampened with water and mild detergent.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals that could damage the surface.
- For stubborn marks, use a non-abrasive household cleaner.
- Ensure grout lines are maintained and re-sealed periodically if necessary, especially in wet areas.