Best current price£96.32from B&Q
Shopping.co.uk recommended and popular offers
B&Q£96.32Visit shop B&Q - J-B Weld Steelstik Reinforced Epoxy Putty (12 Pack)57G (2Oz) Dark Grey Sticks5-Minute Set Time4000 Psi Strength
Visit shop2 offers from £96.32
View price history by clicking the chart icon.
The JB Weld Steelstik Reinforced Epoxy Putty (12 Pack 57g) is designed for professionals and industrial users needing robust metal repair. Its key benefit is a high-strength, machinable bond that sets quickly. A potential caveat is its dark grey color, which may not suit all aesthetic requirements.
| Colour | Grey |
|---|---|
| Brand | JB Weld |
While Steelstik has a 5-minute set time, it achieves its full strength and hardness over several hours. For optimal machinability and maximum strength, it's recommended to allow it to cure for at least 1 hour, though full cure can take up to 24 hours depending on temperature and humidity.
Yes, once Steelstik has fully cured, it can be sanded, primed, and painted to match the surrounding surface.
When stored properly in its original packaging in a cool, dry place, Steelstik typically has a shelf life of 2-3 years.
The coverage area depends on the thickness of the application. A 57g stick is suitable for patching holes, sealing cracks, or rebuilding small to medium-sized metal components.
Yes, once fully cured, Steelstik forms a waterproof and chemical-resistant bond.
No, Steelstik is designed to be hand-mixed. You only need a knife or cutting tool to cut the putty and gloves to protect your hands during mixing. After curing, standard metalworking tools can be used.
Steelstik is designed for demanding repairs but is not intended for continuous high-heat environments beyond typical workshop conditions. Refer to specific temperature resistance data if your application involves extreme heat.
Ensure you have cut through both the resin and hardener layers and have kneaded thoroughly until a uniform color is achieved. Verify storage conditions and that the product has not expired.
Wear gloves during mixing and application. Ensure the putty is at room temperature; extreme cold can make it stiffer.
The repair surface must be clean, dry, and free of rust, grease, oil, and paint. Lightly sanding the metal surface can improve adhesion.
Allow the putty to cure for the full recommended time (often several hours for maximum hardness). Use sharp tools for drilling, tapping, or sanding.
Setup:
Compatibility:
SteelStik is designed primarily for use on ferrous metals (iron, steel) and aluminum. It adheres well to most clean, dry metal surfaces. It is not recommended for use on plastics, fiberglass, or wood.
Care:
