D-C-Fix Whitewood Worktop Wrap - 90cm x 3m

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£23.97from B&Q

All Offers

2 offers from £23.97 - £25.99

View price history by clicking the chart icon.

B&QB&Q - Whitewood 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£23.97
Visit shop
Robert Dyasd-c-fix Whitewood Self-Adhesive Vinyl Wrap - 90cm x 3m
£2.95 delivery
£25.99
Visit shop

Product Information

Full details

This D-C-Fix Whitewood Worktop Wrap is ideal for homeowners and renters looking to refresh kitchen worktops, tabletops, and furniture on a budget. Its key benefit is the ability to provide a new, clean look without the expense and hassle of full replacement, with a major caveat that it is not suitable for direct contact with hot pans. This self-adhesive vinyl film offers an easy DIY application and a durable, wipe-clean surface, available in realistic designs.

All features

Model Part Number200-5226-3
Brandd-c-fix

Extended Product Information

FAQs

Can I use this wrap on a surface that gets very hot?

The wrap is heat resistant up to 70°C. It is not suitable for direct contact with hot pans. Always use worktop savers for hot items.

Is this product suitable for renters?

Yes, the D-C-Fix vinyl film is fully removable, making it an excellent choice for renters. A hairdryer can help soften the adhesive for easier removal.

How do I clean the surface after applying the wrap?

The surface is wipe-clean. Use a damp cloth and mild soap if necessary. Avoid abrasive cleaners.

What tools do I need for application?

You will need a utility cutter for trimming and a felt edge smoother to help remove air bubbles and creases.

Can I reposition the film if I make a mistake?

Yes, the water-based adhesive allows the film to be lifted and reapplied if you make a mistake during application. Simply peel back and start again.

What happens if water gets under the vinyl?

Water getting underneath can cause the vinyl to lift. It is crucial to seal around sinks and hobs with a silicone sealant to prevent this.

How do I prepare the surface before applying the wrap?

The surface must be clean, dry, and smooth. Remove all dust, grease, and any loose debris before application.

Is this a full retail roll or a custom cut?

This item is supplied as a custom cut length, professionally cut from an original master roll. It is not a factory-sealed retail roll.

Troubleshooting

Air bubbles or creases during application

Gently peel back the film using the repositionable adhesive and reapply, using a felt edge smoother to push out air as you go. A hairdryer on a low setting can help to relax the material.

Film is not sticking well

Ensure the surface is thoroughly cleaned and completely dry before application. Reheat the adhesive side slightly with a hairdryer on a low setting and press firmly.

Difficulty molding around curves

Use a hairdryer on a low setting to gently warm and stretch the vinyl. Work from the center outwards to avoid trapping air.

Vinyl lifting at edges

Ensure edges are properly sealed, especially around sinks and hobs, with a suitable silicone sealant. Reapply heat with a hairdryer and press down firmly.

Pros and Cons

Pros

  • Budget-friendly alternative to countertop replacement.
  • DIY-friendly with repositionable adhesive.
  • Durable, wipe-clean, and water-resistant surface.
  • Fully removable, making it suitable for renters.
  • Enhances furniture and surfaces with realistic designs.
  • Made in Germany with phthalate-free PVC.

Cons

  • Not suitable for direct contact with hot pans.
  • Requires careful sealing around sinks and hobs to prevent water damage.
  • Surface can be susceptible to staining if spills are not wiped promptly.
  • May require practice for a perfectly smooth finish on complex shapes.
  • Performance relies on proper surface preparation and application.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the surface is clean, dry, and smooth. Remove any grease or dust.
  2. Measure and cut the vinyl film using the grid on the reverse for guidance. Leave a slight overlap for trimming.
  3. Peel back a small section of the backing paper.
  4. Align the film and carefully apply it to the surface, using a felt edge smoother to push out air bubbles as you go.
  5. For curved edges, use a hairdryer on a low setting to gently warm and stretch the film into place.
  6. Trim any excess material with a utility cutter.
  7. Seal around edges, especially near water sources like sinks, with a silicone sealant.

Compatibility:

This vinyl film is suitable for application on any flat, smooth surface, including kitchen worktops, tabletops, furniture, doors, and cabinets. It is not recommended for textured, uneven, or porous surfaces.

Care:

  • Wipe clean with a damp cloth. Mild soap can be used if necessary.
  • Wipe up spills immediately to prevent staining.
  • Avoid abrasive cleaners or scouring pads, as they can damage the surface.
  • Use worktop savers for hot pans and cutting boards for food preparation.
  • Reapply heat with a hairdryer on a low setting for easier removal.

Price History

DatePrice
Visit shop