Shopping.co.uk

hep Online Straight Connector - 15MM x 1/2" Compression Straight Connector Female Iron

hep Online Straight Connector - 15MM x 1/2" Compression Straight Connector Female Iron

This WRAS approved straight compression brass female coupler is suitable for heating, plumbing, co...

Best current price£12.49from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
B&Q£12.49Visit shop

B&Q - 15mm Compression X 1/2" Bsp Brass Female Iron Coupler Straight Adaptors 15mm X 1/2" Female (Pack Of 2)

Visit shop

One Offer

1 offer from £12.49

View price history by clicking the chart icon.

B&QB&Q - 15mm Compression X 1/2" Bsp Brass Female Iron Coupler Straight Adaptors 15mm X 1/2" Female (Pack Of 2)
Free delivery in 1–3 days
£12.49
Visit shop

Product Information

Full details

This hep Online Straight Connector is designed for heating, plumbing, cooling, and hot & cold water supply systems. It offers a solder-free connection method, making it ideal for DIY enthusiasts and professionals alike, especially in situations where traditional soldering is difficult or not permitted. Its primary benefit is ease of installation and reliable, leak-free connections. A potential caveat is the need for correct tightening to ensure a secure seal.

All features

Model Part Number15mm X 1/2" Female
BrandHartlepool Plumbing Supplies

Extended Product Information

FAQs

What does WRAS approved mean?

WRAS (Water Regulations Advisory Scheme) approval means the product has been tested and complies with the Water Supply (Water Fittings) Regulations 1999, making it suitable for use in public water supplies in the UK.

Can I use this connector with plastic pipes?

This connector is designed for 15mm copper pipes. For plastic pipes, a specific compression fitting designed for that material would be required.

How do I know if the connection is tight enough?

Tighten the compression nut until it is firm. A general guide is hand-tight plus about a half to a full turn with a wrench, but always refer to specific installation guides for precise torque if provided.

What is the warranty period?

The manufacturer provides a 1-Year warranty on this connector.

Can this connector be used for gas lines?

No, this connector is specifically designed and approved for water systems only and should not be used for gas.

Do I need any special tools besides wrenches?

For installation, you will typically need two wrenches (one to hold the connector body, one to turn the nut) and possibly a pipe cutter and deburring tool if preparing the pipe end.

Troubleshooting

Connector is leaking after installation.

Ensure the compression nut is tightened sufficiently. Check that the olive is correctly seated and that the pipe is not damaged or deformed. If the leak persists, the olive or connector may need replacement.

Difficulty tightening the compression nut.

Ensure the threads on both the nut and the connector body are clean and free from debris. Make sure the pipe is inserted straight and fully into the connector.

Pipe does not fit securely into the connector.

Verify that you are using the correct size pipe (15mm) and that the pipe end is not deformed or out of round. Ensure the female thread size (1/2") matches the fitting you are connecting to.

Pros and Cons

Pros

  • Easy and quick to install without soldering.
  • Durable brass construction for long-term use.
  • WRAS approval ensures suitability for potable water.
  • Reduces risk compared to open flame methods.
  • Reliable and leak-free connection when installed correctly.

Cons

  • Requires correct torque to prevent leaks or pipe damage.
  • Not suitable for direct burial or high-vibration applications.
  • May be slightly bulkier than soldered fittings.
  • Olive needs to be seated correctly for optimal performance.
  • Requires specific tools for tightening.

Setup, Compatibility & Care

Setup:

  1. Ensure the pipe end is clean, smooth, and free from burrs.
  2. Slide the compression nut and then the olive onto the 15mm pipe.
  3. Insert the 15mm pipe into the female 1/2" end of the connector, ensuring it is fully seated.
  4. Push the olive up to the end of the pipe.
  5. Slide the compression nut over the olive and thread it onto the connector body.
  6. Tighten the compression nut using an appropriate wrench. For initial setup, tighten by hand until snug, then use a wrench to turn it approximately 1/2 to 1 full turn. Consult manufacturer guidelines for specific torque values if available.

Compatibility:

  • Compatible with 15mm copper pipe and 1/2" female threaded fittings.
  • Suitable for use with hot and cold water, heating, and cooling systems.
  • Always ensure system pressure and temperature are within the product's operational limits.

Care:

  • No regular maintenance is typically required for the connector itself.
  • Periodically check connections for any signs of leakage, especially after initial installation or system pressure changes.
  • Avoid using abrasive cleaners on the brass body; a damp cloth is sufficient for cleaning.

Price History

DatePrice
Visit shop