Best current price£20.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£20.00Visit shop (1) Marble Grey Self-Adhesive Wall Tiles 5056525317715
Visit shop
B&Q£26.97Visit shop B&Q - Marble Grey 30.5 X 30.5Cm Self-Adhesive Vinyl Wall Tiles Pack 6
Visit shop3 offers from £20.00 - £27.49
View price history by clicking the chart icon.
The D-C-Fix Marble Grey Self-Adhesive Vinyl Wall Tiles are designed for DIY enthusiasts and homeowners seeking a cost-effective way to refresh kitchen or bathroom aesthetics without the complexity of traditional tiling. These 1.4mm thick peel-and-stick tiles offer a durable, waterproof finish that mimics premium marble, providing an immediate visual upgrade to flat surfaces. While they are incredibly easy to install, users should be aware that proper preparation and the use of silicone sealant are essential for ensuring a long-lasting, water-resistant seal in high-moisture areas.
| Model Part Number | 5056525317715 |
|---|---|
| Brand | d-c-fix |
Yes, provided you retain the clear film edges and apply a high-quality silicone sealant around all exposed edges to create a waterproof barrier.
No, these are designed to be a grout-free solution. The tiles are installed edge-to-edge for a seamless look.
Measure the opening, mark it on the back of the tile, and use a sharp craft knife to carefully cut the shape before removing the backing paper.
For best results, the wall should be flat and smooth. Textured walls may prevent the adhesive from forming a strong, permanent bond.
Each pack contains 6 tiles, providing enough coverage for a standard splashback area.
Ensure the surface was thoroughly cleaned and free of grease or dust. If the wall is textured, consider using a primer or smoothing the surface first.
Ensure that tiles are aligned carefully during application; use a leveling tool to maintain consistent spacing and ensure the edges are pressed firmly into place.
Re-press the edges firmly against the wall. If lifting persists, ensure you have used silicone sealant to anchor the edges and protect them from moisture.
Before starting your project, ensure that your existing wall surface is clean, dry, and completely smooth. Remove any loose debris or grease that could interfere with the adhesive. The most critical step for success is the 48-hour acclimatization period; place the tiles in the room where they will be installed to allow the material to adjust to the ambient temperature and humidity. To install, peel off the white backing paper while leaving the clear film edge to ensure a watertight seal. Once the tiles are set, apply a bead of silicone sealant along all exposed edges and corners to prevent water ingress in wet environments. Routine care involves simply wiping the tiles down with a soft cloth and mild soap; avoid abrasive chemicals that might degrade the finish.
