Ortlieb Inserts for QL2.1 Hooks - E197
Best current price£5.00from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£5.00Visit shop Ortlieb Black Inserts For Ql2.1 Hooks 8/10/12Mm Size 1
Visit shopTredz£5.00Visit shop All Offers
2 offers from £5.00 - £5.50
View price history by clicking the chart icon.
Product Information
Full details
This guide is for cyclists using Ortlieb panniers with the QL2.1 system who need to adapt their panniers to fit smaller diameter bike rack tubes. The Ortlieb Inserts for QL2.1 Hooks - E197 allows you to securely attach your panniers to racks with 8mm, 10mm, 12mm or 16mm tubing. Please note that these inserts are designed for single panniers and are not compatible with all rack systems.
All features
| Model Part Number | E197 |
|---|---|
| Brand | Ortlieb |
Extended Product Information
FAQs
What pannier systems are these inserts compatible with?
These inserts are compatible with Ortlieb panniers featuring the QL2.1 system.
What rack tube sizes do these inserts accommodate?
They accommodate 8mm, 10mm, and 12mm rack tube sizes, as well as being suitable for 16mm racks.
Are these inserts sold as a pair?
Yes, the inserts are sold as pairs.
How do I determine which insert size I need?
Measure the diameter of your bike rack's tubing. Select the insert size that matches that diameter.
Can I use these inserts with other brands of panniers?
No, these inserts are designed specifically for Ortlieb panniers with the QL2.1 system.
What if I lose an insert?
Replacement inserts can be purchased separately.
How do I remove the inserts?
The inserts can be removed by pulling them out of the QL2.1 hooks.
Are these inserts suitable for all types of bike racks?
These inserts work well with most standard bike racks, however, ensure your rack's tube diameter is one of the sizes supported.
Troubleshooting
Pannier is loose on the rack.
Ensure you are using the correct size insert for your rack. Tighten the hook adjustment if necessary.
Insert is difficult to install.
Make sure the pannier hook is clean, and the insert is properly aligned. Apply a small amount of lubricant if needed.
Pannier does not attach securely.
Double-check that the insert is fully seated in the QL2.1 hook and that the rack tube is fully inserted into the insert. Adjust the hook as needed.
Pros and Cons
Pros
- Allows use of Ortlieb panniers on a wider variety of bike racks.
- Provides a secure and stable connection.
- Easy to install and remove.
- Includes multiple sizes to fit different rack tube diameters.
Cons
- Only compatible with Ortlieb panniers featuring the QL2.1 system.
- Designed for single panniers only.
- Requires manual installation and adjustment.
- May not be compatible with all aftermarket bike racks.
Setup, Compatibility & Care
- Installation: Select the correct insert size (8mm, 10mm, or 12mm) based on your bike rack's tube diameter.
- Insert the appropriate adapters into the QL2.1 hooks on your pannier.
- Attach your pannier to the bike rack as you normally would.
*Compatibility*: These inserts are compatible with all Ortlieb panniers featuring the QL2.1 system. Ensure your bike rack's tube diameter matches one of the insert sizes (8mm, 10mm, 12mm, or 16mm).
*Care*: Clean the inserts regularly to remove any dirt or debris that might affect their performance. Use a damp cloth to wipe them down; avoid harsh chemicals.
Similar items
Coax Adaptor Connecting Kit - Silver - GVTV04SRFrom £5
Sebo 1491GS Upholstery Nozzle - GreyFrom £14
Earbuds - Black - Active Noise Cancelling - TAT2520From £35
Spares2Go American Fridge Water Tap Connection Kit - 1/4" Push Fit, 3/4" BSP, 15mm Compression ValveFrom £15
Opticron Imagic IS Binocular - 14x30From £569
Black Tarpaulin Clip, Pack Of 8 - B&QFrom £5
Insect Bite Healer - USB-C - Classic - BlueFrom £24
Opticron Imagic IS - 12x30From £579
Fox 40 Classic Fingergrip Whistle - Black - FXW102BFrom £11
FloPlast Waste Pipe Bend - Black - 40mmFrom £2
DJI RS Intelligent Tracking Module - DJI RS 4 Mini, RS 4, RS 4 ProFrom £59
FloPlast Waste Pipe Conversion Bend - White - 32mmFrom £2