Best current price£194.97from Furniture123 (BID)
Shopping.co.uk recommended and popular offers
Furniture123 (BID)£194.97Visit shop Xl Joinery Brown Internal Oak Fd30 Fire Door - Pre-Finished - 1981 X 762 X 44Mm - Pattern 10
Visit shop
B&Q£234.97Visit shop B&Q - Internal Oak Pre-Finished Pattern 10 Fire Door1981 X 838 X 44mm (33")
Visit shop10 offers from £194.97 - £239.97
View price history by clicking the chart icon.
This guide is for homeowners and builders seeking a stylish and safe interior door. The XL Joinery Internal Oak Pre-Finished Pattern 10 Fire Door offers an elegant oak veneer design with a fire rating for enhanced safety, providing a consistent look across a property. However, its specific size may require careful planning for some installations.
| Model Part Number | 2040 X 826 X 44mm |
|---|---|
| Brand | XL Joinery |
While the door is pre-finished, it is best suited for general interior use. For areas with high moisture, consider doors specifically designed for such environments. Always ensure good ventilation.
No, the door comes pre-finished and is ready for immediate use. No further treatment is required, but regular cleaning will maintain its appearance.
This door has a half-hour fire rating, meaning it is designed to resist the passage of fire for approximately 30 minutes under test conditions.
Minor trimming may be possible, but it is crucial to consult the manufacturer's guidelines or a professional installer first. Trimming can affect the fire rating and structural integrity.
This product typically refers to the door leaf only. Hardware such as hinges, handles, and locks are usually sold separately.
XL Joinery offers a range of complementary panelled, glazed, bi-fold, and rebated doors in oak. Matching these with the Pattern 10 design will ensure a cohesive look.
The dimensions are 2040mm in height, 826mm in width, and 44mm in thickness.
Check for obstructions, ensure hinges are properly aligned and tightened, and verify the door frame is square and not warped.
Use a soft cloth with a mild, non-abrasive cleaner. For deeper scratches, consult a professional or a wood repair kit suitable for veneered oak.
Ensure the door was installed correctly by a qualified professional and that all seals (if applicable) are intact and functional. Fire ratings are dependent on correct installation.
Natural wood veneers can have variations. If the difference is significant, contact the supplier to discuss potential exchanges or solutions.
Setup: This door is pre-finished and ready for installation. Ensure that the door frame is plumb, level, and square. If adjustments are needed, professional fitting is recommended to maintain the door's integrity and fire rating. Hardware such as hinges and locks should be installed according to manufacturer guidelines, taking care not to compromise the fire-rated construction.
Compatibility: This door is designed to fit standard 44mm door frames. It is part of an extensive range that includes matching panelled, glazed, bi-fold, and rebated doors, allowing for a consistent aesthetic across a property. Always double-check the dimensions (2040 x 826 x 44mm) against your existing or planned opening.
Care: To maintain the oak veneer's appearance, clean the door with a soft, slightly damp cloth. Avoid abrasive cleaners or excessive moisture, as these can damage the veneer and finish. For stubborn marks, use a mild detergent diluted in water, then wipe dry immediately. Periodically check hardware for tightness.
