Bosch Cordless EasyHedgeCut 1845 Hedge Trimmer - 18V

The Bosch EasyHedgeCut 18-45 uses an 18V Li-ion battery. Note that the battery is not included.

Insert the 18V battery into the designated slot on the trimmer until it clicks into place.

Battery life depends on the battery's capacity and the type of trimming. Refer to the battery specifications for estimated run times.

Use a brush or cloth to remove debris from the blades and the body of the trimmer after each use. Do not use water or solvents on the electrical components.

The trimmer is designed for small to medium-sized hedges. The 15 mm tooth spacing will limit the size of branches that can be cut. For thicker branches, it is recommended to use a different tool.

The blade length is 45 cm.

Please refer to the product documentation for warranty information.

Ensure the battery is properly inserted and charged. Check the on/off switch and safety button are fully engaged.

Check the blades for damage or dullness. Clean the blades of any sap or debris. Sharpen or replace the blades if necessary.

The Anti-Blocking System should prevent stalling, but if it occurs, reduce the cutting speed or cut smaller branches. Ensure the blades are clean.