Best current price£14.64from HSS Hire
Shopping.co.uk recommended and popular offers
HSS Hire£14.64Visit shop Siniat Green Universal Bonding Compound 25Kg Gtec
Visit shop
B&Q£36.00Visit shop B&Q - Gtec Universal Bonding Compound Sealing Plasterboard Direct To Masonry Brick Concrete Wall Diy Building Construction 25Kg
Visit shop2 offers from £14.64 - £36.00
View price history by clicking the chart icon.
The Siniat GTEC Universal Bonding Compound is a high-performance adhesive solution specifically engineered for professional contractors and serious DIYers tasked with drylining masonry, brick, or concrete surfaces. Its primary benefit is providing a robust, reliable bond between plasterboard and various substrates, ensuring a professional-grade finish for wall installations. A notable caveat to consider is that as a 25kg powder-based product, it requires accurate water mixing and careful site preparation to ensure optimal setting times and bond strength.
| Colour | Green |
|---|---|
| Model Part Number | 5026003009692 |
| Brand | Siniat |
This compound is specifically designed for masonry, brick, and concrete; it is not suitable for bonding to timber or metal panels directly.
Coverage varies depending on the unevenness of the wall and the thickness of the dabs, but a standard bag typically covers approximately 5-6 square meters of plasterboard.
When kept in its original sealed packaging in dry conditions, the compound has a shelf life of approximately 6 months.
While it bonds well to clean masonry, highly suction-prone surfaces should be treated with a suitable primer to prevent the compound from drying out before it sets.
No, this is a standard interior bonding compound and should not be used in areas subject to permanent dampness or high moisture levels.
Ensure the substrate is not excessively porous or hot; slightly dampen the wall before application to slow down moisture absorption.
Always add powder to the water rather than water to the powder, and use an electric whisk at a low speed for a more uniform consistency.
Check that the surface is free of dust, grease, or loose paint; these contaminants will prevent the compound from gripping the substrate.
To prepare the compound, use a clean mixing bucket and add the powder to clean water, mixing until a smooth, lump-free consistency is achieved. Always follow the manufacturer's specified water-to-powder ratio to ensure maximum bond strength. Store the bags in a cool, dry environment off the ground to prevent moisture ingress, which can cause the powder to harden prematurely. Ensure the temperature remains above 5 degrees Celsius during application to allow for proper curing.
