Best current price£51.25from B&Q
Shopping.co.uk recommended and popular offers
B&Q£51.25Visit shop B&Q - Waterproof Coating & Seal Black 946Ml + All Weather Extreme Tape 48mm X 11MHeavy Duty Waterproof Repair Kit
Visit shop3 offers from £51.25
View price history by clicking the chart icon.
This Gorilla repair kit is for homeowners and DIYers needing a robust solution for leaks and water damage. Its key benefit is providing heavy-duty, long-lasting waterproof protection on a variety of surfaces. A potential caveat is that the coating requires a proper curing time for maximum durability. The kit includes Gorilla Waterproof Coating & Seal Black (946ml) and All Weather Extreme Tape (48mm x 11M), designed to create a flexible, rubberized waterproof layer and an instant, strong seal, respectively. It's ideal for both emergency fixes and permanent waterproofing projects, indoors and outdoors.
| Brand | Gorilla |
|---|
Yes, the coating can typically be painted over once it is fully cured. Ensure the surface is clean and dry before painting.
When applied correctly and under normal conditions, the seal is designed for long-term durability, offering lasting protection against water and moisture.
The All Weather Extreme Tape can adhere to wet surfaces for emergency repairs, but it is not specifically designed for continuous underwater submersion or high-pressure water applications.
For optimal results, apply the coating and tape in temperatures between 50°F (10°C) and 90°F (32°C). Avoid application in freezing temperatures or extreme heat.
While the tape is versatile, it performs best on rigid or semi-rigid surfaces. Adhesion to very flexible or porous materials like fabric may be limited.
Coverage varies depending on the application method and number of coats. Refer to the product packaging for specific coverage estimates.
This product is intended for general waterproofing and repair. For potable water applications, consult specific product guidelines or use NSF-certified products.
Ensure application in recommended temperature and humidity conditions. Avoid applying too thickly. Check for adequate ventilation.
Ensure the surface is clean and free of dust, oil, or moisture (unless applying to a wet surface as intended for emergency use). Press firmly during application to ensure full contact.
The surface may not have been properly prepared, or insufficient coating/tape was used. Ensure the area is fully covered and multiple coats of coating were applied. Allow full cure time.
The surface may have experienced excessive movement or temperature fluctuation beyond the coating's flexibility. Ensure the coating was applied in thin, even layers and allowed to cure fully before stress.
Surface Preparation: Before applying either the coating or the tape, ensure the surface is clean, dry (unless using tape on wet surfaces), and free of debris, grease, or loose material. For best adhesion, lightly sand smooth surfaces.
Coating Application: Apply the Gorilla Waterproof Coating using a brush, roller, or spray in thin, even coats. Allow each coat to dry partially before applying the next. Multiple coats are recommended for maximum protection. Ensure adequate ventilation during application and drying. Allow the final coat to cure completely as per product instructions (typically 24 hours for full cure, but tack-free sooner) before exposing to water.
Tape Application: Cut the All Weather Extreme Tape to the desired size. Peel off the backing and apply firmly to the surface, pressing out any air bubbles. For best results, apply with firm, consistent pressure, ensuring complete adhesion around the edges.
Compatibility: This kit is compatible with wood, metal, brick, stone, concrete, and most plastics. Avoid application on silicone, Teflon, or waxed surfaces.
Care: Once applied and cured, the sealed area requires minimal care. Periodically inspect for any signs of damage or wear. Clean the area gently with mild soap and water if necessary; avoid abrasive cleaners.
