Best current price£142.73from PVC Cladding UK
Shopping.co.uk recommended and popular offers
PVC Cladding UK£142.73Visit shop Knotwood Grey Aluminium Cladding Two Part External Corner - 2825Mm Natural Oak
Visit shop2 offers from £142.73 - £158.59
View price history by clicking the chart icon.
Designed for professional installers and DIY renovators, the Knotwood Aluminium Cladding Two Part External Corner is the ideal solution for achieving a seamless, professional finish at building corners. This system provides a clean, continuous transition between cladding panels while offering enhanced protection against impact and weather-related wear. While it significantly elevates the aesthetic and structural integrity of your project, users should note that the two-part design requires precise alignment during installation to ensure a perfect fit.
| Model Part Number | KECEXCNO2825 |
|---|---|
| Brand | Knotwood |
This profile is specifically engineered for standard 90-degree external corners.
Yes, the aluminium finish is designed to be highly durable and resistant to UV rays, maintaining its colour integrity over long periods.
If your wall height is less than 2825mm, you will need to cut the profile to size using an aluminium-appropriate saw blade.
It is specifically designed to work with the Knotwood aluminium cladding system for a perfect fit.
The base component of the two-part system should be mechanically fixed to the structural frame of the building.
Check for debris or cladding panel overhangs within the channel. Ensure the cladding panels are not set too far out from the corner.
Ensure the corner profile is plumb and that the cladding boards were cut accurately to the necessary clearance depth.
Use a touch-up pen or finish-matched sealant specifically designed for the Natural Oak colour to conceal minor surface imperfections.
For optimal results, ensure the base surface is level and plumb before mounting the cladding panels. The two-part system typically involves a base track followed by a cover trim; verify that the base track is securely fixed to the building frame to prevent any movement. For cutting, use a fine-tooth blade suitable for aluminium to prevent burring or damage to the Natural Oak finish. Maintenance is minimal: simply wipe the surface with a soft, damp cloth and mild detergent to remove dirt or debris. Avoid using harsh chemical cleaners or abrasive scouring pads, as these can scratch or degrade the surface finish over time.
