Best current price£21.45from eBay
Shopping.co.uk recommended and popular offers
eBay£21.45Visit shop Hataka BS52 Modern Royal Air Force Vol.1 Blue Line Acrylic Paint Set
Visit shop1 offer from £21.45
View price history by clicking the chart icon.
The Hataka Hobby Modern Royal Air Force Vol.1 Blue Line Acrylic Paint Set (BS52) is designed for scale modelers looking to achieve authentic historical accuracy on post-1990s RAF aircraft. This specialized paint set provides the precise grey and green camouflage tones necessary for building iconic models like the Jaguar, Tornado, BAe Hawk, and Eurofighter Typhoon. While it offers exceptional color matching for specific military eras, users should note that these water-based acrylics require specific thinning ratios for optimal performance in airbrush systems compared to lacquer-based alternatives.
| Model Part Number | BS52 |
|---|---|
| Brand | Hataka Hobby |
No, they are highly pigmented and generally require thinning with a dedicated acrylic thinner to reach the correct consistency for airbrushing.
It is generally not recommended as it may damage the acrylic binder. Stick to Hataka or compatible acrylic-specific thinners.
Yes, using a primer is highly recommended to ensure the acrylic paint bonds correctly to the plastic surface.
Allow at least 30 to 60 minutes between coats for the paint to dry, and 24 hours for a full cure.
While less toxic than lacquers, they should still be used in a well-ventilated area and are intended for adult modelers.
Increase the thinning ratio or use a dedicated flow improver to extend the drying time at the tip.
Ensure the model was properly primed and the paint was allowed to fully cure for 24 hours before applying masking tape.
The paint is likely drying before hitting the surface; increase air pressure slightly or move the airbrush closer to the model.
Before application, ensure the model surface is clean and primed with a high-quality hobby primer to guarantee paint adhesion. If using an airbrush, test your thinning ratio (typically a 1:1 or 2:1 paint-to-thinner ratio) on a plastic spoon before applying it to the model. Store the paint bottles in a cool, dark place with the caps tightly sealed to prevent the acrylic emulsion from drying out. If the paint becomes too thick, add small amounts of thinner and mix thoroughly with a stainless steel agitator ball. Always clean your airbrush immediately after use with an appropriate acrylic cleaner to prevent nozzle clogging.
