ANYCUBIC PETG Filament - 1KG - White
Best current price£7.99from Joybuy UK
Best offers
Shopping.co.uk recommended and popular offers
Joybuy UK£7.99Visit shop Anycubic Joybuyxanycubic Filament Petg 1Kg - White 6974662352767
Visit shopJoybuy UK£7.99Visit shop One Offer
1 offer from £7.99
View price history by clicking the chart icon.
Joybuy UKAnycubic Joybuyxanycubic Filament Petg 1Kg - White 6974662352767
£3.99 delivery
£7.99
Visit shop
Product Information
Full details
The ANYCUBIC PETG Filament is designed for 3D printing enthusiasts and professionals seeking a reliable, durable material that bridges the gap between the ease of PLA and the structural strength of ABS. This 1KG spool of white filament provides excellent layer adhesion and minimal warping, making it an ideal choice for functional prototypes and long-term projects; however, users should be aware that PETG often requires slightly higher printing temperatures and more precise bed leveling compared to basic PLA.
All features
| Brand | ANYCUBIC |
|---|
Extended Product Information
FAQs
What is the recommended printing temperature for this PETG?
We recommend a nozzle temperature between 220°C and 250°C depending on your printer's flow rate.
Do I need a heated bed?
Yes, a heated bed set between 70°C and 80°C is highly recommended to ensure proper adhesion and reduce warping.
Is this filament compatible with all FDM printers?
It is compatible with most FDM printers that accept 1.75mm filament and can reach the required extrusion temperatures.
How should I store this filament?
Store it in a dry, cool place, preferably in a sealed container or bag with desiccant to prevent moisture absorption.
Does PETG release toxic fumes?
ANYCUBIC PETG is designed for low odor emission, but we always recommend printing in a well-ventilated area.
Why are my prints coming out brittle?
This is often caused by moisture absorption or printing at temperatures that are too low for proper layer bonding.
Troubleshooting
Stringing or oozing between parts
Increase retraction speed or distance in your slicer software and lower the printing temperature by 5-degree increments.
Poor bed adhesion
Increase the heated bed temperature and ensure the first layer is printed at a slower speed to allow the plastic to bond properly.
Popping noises during print
The filament has likely absorbed moisture; dry the spool in a filament dryer or dehydrator.
Pros and Cons
Pros
- Excellent layer adhesion for stronger final parts
- High toughness and impact resistance
- Low odor during printing process
- Minimal warping compared to ABS
- Tangle-free spooling for reliable feeding
Cons
- Requires higher nozzle temperatures than PLA
- More prone to stringing if settings aren't calibrated
- Can be sensitive to high moisture environments
Setup, Compatibility & Care
To ensure your ANYCUBIC PETG prints are successful, verify that your printer is compatible with 1.75mm filament. Before starting a print, ensure the build plate is clean and properly leveled. Because PETG is somewhat hygroscopic, it is recommended to store the spool in a cool, dry place inside a sealed bag with desiccant packs when not in use. If the filament has been exposed to humidity for an extended period, you may notice popping sounds or steam during extrusion; in these cases, dry the filament in a dedicated filament dryer or a food dehydrator at approximately 45°C for 4 to 6 hours before usage.