Sony BC-SAD1 Dual Battery Charger

USB PD (Power Delivery) is a standard that allows for higher power transmission over USB-C cables, enabling faster charging for compatible devices like the BC-SAD1 charger.

No, the Sony BC-SAD1 requires a separate 45W USB PD power adapter and USB-C cable, which are not included with the charger.

It takes approximately 115 minutes (about 1 hour and 55 minutes) to charge two NP-SA100 batteries from empty to full.

No, a USB PD compliant charger with at least 45W output is required for optimal and fast charging performance. Lower power chargers may not work or will charge very slowly.

The integrated health check performs a quick assessment of the battery's condition, providing an indication before you begin shooting. It helps to identify batteries that may not perform reliably.

No, the BC-SAD1 is specifically designed for the Sony NP-SA100 high-capacity battery system and is not compatible with older battery models.

Ensure the USB PD power adapter is properly connected to the charger and the wall outlet. Verify the power adapter and cable are functioning correctly and meet the 45W USB PD requirement.

Confirm the NP-SA100 batteries are correctly inserted into the slots. Check that the battery contacts on both the charger and the batteries are clean. Try charging one battery at a time to isolate the issue.

A blinking light may indicate an error. Remove the batteries, check for any obstructions or damage, and ensure a compatible power source is connected. Consult the product manual for specific blinking patterns.

The health check provides a preliminary assessment. If indicated as poor, the battery may have reduced capacity or be nearing the end of its lifespan. Consider replacing the battery for reliable performance.