Bosch Holesaws EXPERT Material Power Change Plus Hole Saw 19 x 60mm - Bosch - 2608901912

This hole saw is designed for tough materials, including concrete, masonry, brick, tiles, and dense wood. It offers superior performance in construction materials.

The maximum cutting depth for this hole saw is 60 mm.

You need a drill capable of handling hole saws of this size and a compatible Bosch Power Change Plus arbor. The drill itself doesn't need to be specialized, but the arbor is essential.

It utilizes Bosch Carbide Technology, which provides exceptional durability and wear resistance, allowing it to last up to 50 times longer than standard Bosch hole saws in tough materials.

No, the Bosch Power Change Plus arbor is sold separately. It is required for mounting the hole saw.

After use, clear away any dust or debris from the teeth and the connection point with the arbor. A brush can be helpful. Store in a dry place.

This model is 19 mm in diameter and 60 mm in cutting depth.

Ensure you are using a Bosch Power Change Plus arbor. Verify that the arbor's locking mechanism is clean and free of debris. Push the hole saw firmly onto the arbor and twist until it clicks into place.

Check that the hole saw is correctly mounted and the drill speed is appropriate for the material. Ensure you are using sufficient pressure and clearing debris from the cut frequently. For very hard materials, consider using a cutting fluid or water to cool the cutting edge.

Inspect the carbide teeth regularly. If teeth appear significantly worn, chipped, or damaged, the hole saw should be replaced to maintain cutting performance and safety.