Dapetz Wood Plug Cutter Set - 6mm/10mm/13mm/16mm

For the most seamless finish, use the same timber as your workpiece. This ensures the grain and color match perfectly, making the plug virtually invisible once installed.

Yes, they are compatible with most standard drills. However, for best results and precision, a bench drill is highly recommended over a hand drill.

The cutters can be sharpened using a sharpening stone or a suitable sharpening tool. Focus on maintaining the original cutting angle of the edge.

Smoking indicates that the cutter is generating excessive heat, likely due to high speed or a dull cutting edge. It's a signal to slow down, let the cutter cool, and check its sharpness.

The set includes four versatile sizes: 6mm, 10mm, 13mm, and 16mm.

The titanium coating is applied for enhanced durability and wear resistance, significantly extending the working life of the cutters. While all coatings can wear over extensive use, this coating is designed to be robust.

Ensure the drill speed is not too high. Check if the cutting edge is sharp; sharpen if necessary. Make sure the plug cutter is securely fixed in the drill chuck.

Immediately stop drilling. Reduce drilling speed. Allow the cutter to cool down before continuing. Check the cutting edge for damage or dullness.

Verify you are using the correct corresponding hole size for the plug cutter. Ensure the drill is perpendicular to the workpiece, especially when using a bench drill.

The cutters are made of carbon steel with anti-rust properties but can rust if stored in humid conditions. Clean thoroughly with a dry cloth and apply a light coat of oil for protection. Store in a dry environment.