D-C-Fix Vinyl Wrap - 67.5cm x 3m

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£19.97from B&Q

All Offers

2 offers from £19.97 - £22.99

View price history by clicking the chart icon.

B&QB&Q - Marble Cortes Silver 67.5Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£19.97
Visit shop
Robert Dyasd-c-fix Marble Effect Vinyl Wrap - Silver - 67.5cm Width
£2.95 delivery
£22.99
Visit shop

Product Information

Full details

This D-C-Fix vinyl wrap is for DIY enthusiasts and renters looking to refresh surfaces like kitchen worktops and furniture affordably. Its key benefit is providing a realistic aesthetic upgrade without the cost or permanence of replacement. A key caveat is its heat resistance limit of 70°C, requiring protection from hot pans.

All features

Model Part Number67.5cm x 3m
Brandd-c-fix

Extended Product Information

FAQs

Can I use this on textured surfaces?

The vinyl adheres best to smooth, flat surfaces. Textured surfaces may prevent a good bond and lead to premature lifting or air bubbles.

Is this product suitable for food preparation areas?

Yes, the surface is wipe-clean and durable. However, for direct food preparation, it's recommended to use a chopping board, and worktop savers must be used for hot pans due to the 70°C heat resistance limit.

How long does the vinyl typically last?

The material has a 5-star rating for adhesion, lightfastness, shrinkage, and durability. With proper care and adherence to usage guidelines (e.g., using worktop savers), it can provide a long-lasting aesthetic upgrade.

What tools do I need for application?

You will need a sharp utility cutter or craft knife, a felt edge smoother or squeegee, a measuring tape, and a hairdryer for curved edges. Silicone sealant is recommended for edges around wet areas.

Can I apply this over existing wallpaper or other vinyl?

It is best applied to a clean, bare surface. Applying over existing wallpaper or vinyl may result in an uneven finish and poor adhesion. It's recommended to remove old coverings first.

What does 'repositionable' mean during application?

It means that if you make a mistake while applying the vinyl, you can gently peel it back and reposition it without damaging the adhesive or the vinyl itself, allowing you to correct placement and avoid bubbles.

Is the material safe for use in kitchens?

Yes, the material is phthalate-free and made in Germany. It is safe for use in kitchens, provided the heat resistance and sealing guidelines are followed.

Troubleshooting

Air bubbles or creases during application

Gently lift the vinyl and reapply, using a felt edge smoother to work out the air. If the adhesive has bonded, a hairdryer on low heat can sometimes help lift and re-smooth.

Vinyl not sticking properly

Ensure the surface is clean, dry, and smooth. For very porous surfaces, a primer might be needed (test in an inconspicuous area first). Ensure adequate pressure is applied during smoothing.

Water getting under the edges

Apply a bead of silicone sealant around the edges where the vinyl meets sinks, hobs, or other wet areas to create a watertight seal.

Difficulty removing the vinyl

Gently heat the vinyl with a hairdryer on a low setting. This softens the adhesive, making removal easier. Peel slowly and steadily.

Surface stains easily

Wipe up spills immediately. For stubborn marks, use a mild detergent and a soft cloth. Avoid abrasive cleaners.

Pros and Cons

Pros

  • Budget-friendly alternative to replacing surfaces.
  • Easy to apply for DIYers.
  • Fully removable, suitable for renters.
  • Wide range of realistic designs available.
  • Repositionable during application to fix errors.
  • Durable and easy to wipe clean.

Cons

  • Limited heat resistance (70°C), requires worktop savers for hot pans.
  • Requires careful application to avoid air bubbles and creases.
  • Needs sealing around sinks and hobs to prevent water ingress.
  • Not a factory-sealed retail roll, professionally cut and repackaged.
  • May require a hairdryer for application on curves and for removal.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth.
  2. Measure and cut the vinyl using the grid on the reverse, allowing for overlap.
  3. Peel back a small section of the backing paper.
  4. Carefully align the vinyl and begin applying, using a felt edge smoother to press out air bubbles and creases as you go.
  5. For curved areas, gently heat the vinyl with a hairdryer on a low setting to make it more pliable.
  6. Trim any excess with a sharp utility cutter.
  7. Seal edges around sinks and hobs with silicone sealant.

Compatibility:

  • Suitable for any clean, flat, non-porous surface.
  • Ideal for countertops, tabletops, furniture, cabinet doors, and more.

Care:

  • Wipe clean with a damp cloth.
  • Wipe up spills immediately to prevent staining.
  • Avoid placing hot pans directly on the surface; use worktop savers.
  • Use chopping boards for food preparation.

Price History

DatePrice
Visit shop