Sandberg Webcam Privacy Cover Saver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for individuals concerned about webcam security and privacy. The Sandberg Webcam Privacy Cover Saver offers a simple, physical barrier to prevent unwanted access to your camera lens, ensuring your privacy when not in use. A potential caveat is that it adds a slight physical element to your device.
All features
| Brand | Sandberg |
|---|
Extended Product Information
FAQs
How do I know if this cover will fit my webcam?
The cover is designed for lenses with a maximum diameter of 2 cm (0.79 inches). Measure your webcam lens; if it is 2 cm or smaller, the cover should fit.
Will this damage my laptop screen or webcam?
When applied and removed carefully, the cover should not cause damage. The material is plastic, and the adhesive is designed for temporary attachment. Avoid using harsh chemicals for removal.
How do I open and close the cover?
The cover features a simple sliding mechanism. You can gently push it open with your fingertip to reveal the lens and slide it closed to cover the lens.
Is this cover suitable for all types of webcams?
It is suitable for most standard built-in laptop webcams and external webcams where the lens diameter does not exceed 2 cm. Very large or uniquely shaped lenses may not be compatible.
What is the product made of?
The Sandberg Webcam Privacy Cover Saver is made of plastic.
How many covers come in a pack?
This product comes with one privacy protection cover per pack.
Troubleshooting
Cover is difficult to slide.
Ensure there is no debris obstructing the sliding mechanism. Gently clean the edges of the cover and the lens area. Check that the cover is properly aligned with the lens.
Adhesive is not sticking well.
Re-clean the surface of your device where the cover will be applied. Ensure the surface is completely dry and free of dust or oils. Press firmly for at least 30 seconds after application.
Cover feels loose after a while.
The adhesive may be losing its grip. Clean the surface again and reapply with firm pressure. Consider using a small piece of double-sided tape suitable for electronics if the original adhesive fails over time.
Pros and Cons
Pros
- Provides a physical barrier for enhanced privacy.
- Easy to install with self-adhesive backing.
- Simple sliding mechanism for quick access.
- Lightweight and unobtrusive design.
- Cost-effective privacy solution.
Cons
- Adds a small amount of bulk to the device.
- May not fit unusually shaped or very large webcam lenses.
- The adhesive may leave residue if removed improperly.
- Requires manual operation for each use.
Setup, Compatibility & Care
Setup:
- Ensure the area around your webcam lens is clean and dry.
- Peel off the protective backing from the self-adhesive strip.
- Carefully align the cover over the webcam lens and press firmly to secure it.
- Test the sliding mechanism to ensure it moves freely.
Compatibility:
- Designed for webcams with a maximum lens diameter of 2 cm (0.79 inches).
- The opening diameter is 2.01 cm.
- The overall product dimensions are 30 mm (width) x 28 mm (height) x 4 mm (depth).
- Suitable for most built-in laptop webcams and many external USB webcams.
Care:
- Clean the cover with a soft, dry or slightly damp cloth. Avoid abrasive cleaners.
- If the adhesive needs to be reapplied or removed, do so gently to avoid damaging the device surface. Use a gentle adhesive remover if necessary.