Knipex 78 Series XL Electronic Super Knips - Knipex - 78 Series XL

The 'XL' designation means these Knipex Super Knips are 15mm longer than the standard version, which provides greater stability and a longer reach for cutting.

These are specialized electronic cutters designed for precise, flush cutting of very fine wires. They are not intended for general-purpose wire stripping or cutting thicker gauge wires.

Keep the cutting edges clean by wiping them with a soft cloth after use. Avoid cutting materials they are not designed for, and periodically lubricate the joint.

The precisely shaped tips can cut wires very close to a surface from Ø 0.2mm.

No, the opening spring is integrated for automatic opening and does not require adjustment. It contributes to fatigue-free work.

These electronic cutters are not insulated. Always ensure the power source is disconnected before working on or near electrical components.

Ensure you are cutting the wire as close to the base of the cutting edges as possible. Check for any debris lodged between the blades and clean thoroughly. If damage is suspected, contact the manufacturer.

Apply a small amount of light machine oil to the joint and work the handles back and forth. Clean any dirt or debris from the joint area.

Verify that the wire is within the specified cutting capacity (down to Ø 0.2mm). Ensure the cutting edges are clean and properly aligned. Damaged edges may need professional attention or replacement.