ProWarm Electric Underfloor Heating Mat Kit - 100W - 10m2

You can cut the mesh of the mat to maneuver around obstacles or change direction, but you must *never* cut the heating cable itself, as this will damage the mat and void the warranty.

The mat is compatible with most ProWarm thermostats, including basic digital, programmable, and advanced WiFi models. Choose one that suits your control and energy-saving preferences.

While DIY installation is possible with careful planning and adherence to instructions, professional installation by a qualified electrician is strongly recommended to ensure safety and correct connection to the power supply.

The ProWarm Electric Underfloor Heating Mat Kit comes with a generous 25-year warranty.

Yes, this mat is suitable for use under most floor coverings including tiles, stone, vinyl, and laminate. Always check the specific requirements and recommendations of your chosen floor covering manufacturer regarding underfloor heating.

The mat itself is only 3mm thick. When embedded in a self-leveling screed, the total build-up is typically around 10-15mm, depending on the screed thickness used.

The 100W/m² output is generally considered ideal for supplemental heating or for primary heating in very well-insulated rooms or smaller spaces. For colder climates or less insulated areas, a higher output mat (like the 150W or 200W versions) might be more suitable as a primary heat source.

Check the RCD is engaged and the thermostat is correctly wired and set to activate. Verify continuity of the heating mat using a multimeter (requires professional knowledge).

Ensure the mat is laid evenly without overlapping. Check thermostat settings and probe placement. Verify the screed or adhesive has fully covered the mat.

Check the power supply to the thermostat. Ensure it is correctly connected to the heating mat and its own power source.

This indicates a potential break in the heating cable. Professional inspection and repair may be required, or replacement of the mat may be necessary.