Harder & Steenbeck Infinity CRplus 2024 O-Ring Seal Kit - 722330

O-rings create seals between different parts of the airbrush, preventing air and fluid leaks. They are critical for maintaining consistent air pressure and a precise spray pattern.

The frequency of replacement depends on usage and the types of materials used. Inspect them regularly for signs of wear, such as cracking or flattening. Typically, replacement might be needed every 6-12 months with regular use, or sooner if performance issues arise.

It is highly recommended to use genuine Harder & Steenbeck O-rings designed for your specific Infinity CRplus 2024 model. Non-specific O-rings may not fit correctly or may be made of incompatible materials, potentially damaging your airbrush.

Basic disassembly tools might be required as per your airbrush manual. For removing old O-rings, a small, non-metallic pick or tool is recommended to avoid scratching delicate airbrush parts. A light application of airbrush-safe lubricant can help with installing new O-rings.

Ensure all O-rings were replaced correctly and are seated properly. If issues persist, the problem might lie with other components like the needle, nozzle, or air cap, which are not included in this seal kit.

The part number for this specific O-Ring Seal Kit for the Harder & Steenbeck Infinity CRplus 2024 is 722330.

Ensure the O-ring around the needle packing nut is correctly seated and not damaged. If damaged, replace it with a new one from the kit.

Check the O-rings associated with the nozzle and fluid needle assembly. Ensure they are properly installed and creating a seal.

Worn or damaged O-rings can cause pressure fluctuations. Replace all relevant O-rings in the kit to restore consistent airflow.

Verify that all O-rings are correctly seated in their grooves and that no parts were reassembled without their respective seals.