Best current price£258.00from eBay
Shopping.co.uk recommended and popular offers
eBay£258.00Visit shop Victron ORI122421226 Orion IP67 12/24-50A (1200W) DC-DC Converter
Visit shop2 offers from £258.00 - £260.39
View price history by clicking the chart icon.
The Victron Energy Orion IP67 12/24V 50A 1200W DC/DC Converter is designed for users needing to convert 12V to 24V DC power with a robust 50A output, particularly in harsh environments. Its key benefit is its IP67 rating, ensuring protection against water, shock, and dirt. A primary consideration is that it is a non-isolated converter. This device offers a stable power supply, even with fluctuating input voltages, thanks to its wide input range and durable, encapsulated design.
| Model Part Number | NT-1207 |
|---|---|
| Brand | Victron Energy |
This is a non-isolated DC-DC converter. This means there is no electrical separation between the input and output circuits.
The converter has a wide input voltage range of 15V to 40V DC.
No, this specific model is designed exclusively for converting 12V DC input to 24V DC output.
It is recommended to install appropriate fuses on both the input and output lines, according to Victron Energy's specifications and local regulations.
An IP67 rating signifies that the device is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes.
The converter comes with pre-attached 1.8-meter cables. While robust, if damaged, professional replacement or consultation with the manufacturer is advised.
Yes, the converter is designed to operate in hot environments and includes protection against overheating.
Verify the input voltage is within the 15V-40V range. Check all connections for security and proper polarity. Ensure the input current is sufficient for the load.
Ensure adequate ventilation around the unit. Check for excessively high ambient temperatures. Verify the load does not exceed the 50A continuous rating.
Inspect input power source for stability. Check for loose connections at the input or output terminals. Ensure the input voltage is not dropping below 15V under load.
Confirm the input voltage is stable and within range. Check for excessive voltage drop across the output cables due to undersized wiring or long runs. Ensure the load is not drawing more current than the converter can provide.
Setup: Ensure the converter is installed in a location protected from excessive heat and has adequate ventilation, despite its heat tolerance. Connect the 12V input cables to the appropriate power source and the 24V output cables to the loads. Due to its non-isolated nature, pay close attention to grounding and ensure there are no unintended ground loops in the system. Always follow recommended wiring gauge and fusing practices for both input and output circuits.
Compatibility: This converter is designed for 12V DC input and 24V DC output. It is compatible with systems where the input voltage remains within the 15V-40V range. It can be used in conjunction with other Victron Energy products and standard DC power systems.
Care: The IP67 rating means the unit is protected against dust ingress and temporary immersion in water. Clean the exterior with a damp cloth if necessary. Avoid using harsh chemicals or solvents. Ensure connections remain clean and secure.
