Setup, Compatibility & Care Instructions
Setup:
- Ensure the surfaces to be bonded are clean, dry, and free from dust, oil, or grease.
- Shake the can vigorously for at least 10-15 seconds before use.
- Hold the can upright, approximately 6-8 inches (15-20 cm) away from the surface.
- Apply a thin, even coat to one or both surfaces, depending on the desired bond strength and material porosity.
- Allow the adhesive to become tacky before joining the surfaces (typically 30-60 seconds, check manufacturer instructions for specific drying time).
- Press surfaces together firmly.
Compatibility:
This adhesive is compatible with a wide range of materials including cardboard, paper, fabric, carpet, leather, upholstery foam, plastic, metal, and wood. Test on a small, inconspicuous area first if unsure about compatibility with a specific material.
Care & Storage:
- After use, turn the can upside down and spray for a few seconds to clear the nozzle and prevent clogging.
- Store in a cool, dry place, away from direct sunlight and heat sources.
- Keep the can upright when storing.
- Use within the recommended shelf life for optimal performance.